System information
Table Of Contents
- Introduction
- Configuration and Setup
- Physical Details
- System Features
- Interfaces and Connectors
- Utility I/O Connectors
- IDE
- SATA Ports
- Serial Ports
- Parallel/Floppy Port
- PS/2 Keyboard and Mouse
- USB
- CompactFlash
- Programmable LED
- External Speaker
- Push-Button Reset
- Video Interface
- Ethernet Interface
- CPU Temperature Monitor
- Audio
- Watchdog Timer
- Analog Input
- Digital I/O
- SPI Interface
- PWM Outputs and TACH Inputs
- PC/104 Expansion Bus
- System Resources and Maps
- Special Registers
- Appendix A – References
Physical Details
EBX-22 Reference Manual 22
EBX-22 CONNECTOR FUNCTIONS AND INTERFACE CABLES
The following table notes the function of each connector, as well as mating connectors and
cables, and the page where a detailed pinout or further information is available.
Table 1: Connector Functions and Interface Cables
Connector
1
Function Mating Connector Cable Cable Description Page
J2 Memory DDR2 DRAM – – 29
J3 USB 2 USB Series A Plug – – 40
J4 USB 3 USB Series A Plug – – 40
J5 Ethernet 1 RJ45 Crimp-on Plug – – 47
J6 Main Power Input
(EBX Compliant)
Molex 39-01-2100
Molex 39-00-0059 (10 ea.)
CBR-2022 6” ATX to EPIC power
cable
27
J7 SVGA Video
Output
FCI 89361-712LF or
FCI 89947-712LF
CBR-1201 1’ 12-pin 2mm IDC to
15-pin HD D-Sub VGA
43
J8 SATA 1 Standard SATA CBR-0701;
CBR-0401
500mm (19.75”) 7-pin,
straight-to-straight
SATA data; ATX to
SATA power adapter
35
J9 USB 0 USB Series A Plug – – 40
J10 SATA 2 Standard SATA CBR-0701;
CBR-0401
500mm 7-pin, straight to
straight SATA data; ATX
to SATA power adapter
35
J11 USB 1 USB Series A Plug – – 40
J12 Ethernet 0 RJ45 Crimp-on Plug – – 47
J13 USB Solid State
Drive
Intel Z-U130 SSD, 2mm
socket
_ _ 40
J14 COM 1-4, PLED,
PS/2 Keyboard
and Mouse, Reset
Button, Speaker,
External Wake
FCI 89361-350LF CBR-5009A 18” 2mm 50-pin to 50-
pin IDC to breakout
board CBR-5009B
31
J15 Digital I/O 0-15,
A/D 0-7, Reset,
PLD, PWM 1-3
FCI 89361-340LF CBR-4004A 12” 2mm 40-pin to 40-
pin IDC to CBR-4004B
board
32
J16 CPU Fan – – Fan power cable with 2-
pin connector
–
J17 PC-104-Plus AMP 1375799-1 – – 69
J19 LVDS 20-pin, PanelMate 1.25mm CBR-2010
or
CBR-2011
18-bit TFT FPD using
20-pin Hirose
18-bit TFT FPD using
20-pin JAE
44
J20 CompactFlash Type I or Type II
Compact Flash
– – 40
J22 IDE Hard Drive FCI 89947-144LF CBR-4406
CBR-4405
2
18” 2mm IDE cable
2mm to 0.1” adapter
34
J23 USB 4, Digital I/O
16-31, Audio
FCI 89361-340LF CBR-4004A 12” 2mm 40-pin to 40-
pin IDC to CBR-4004B
board
40
J24 HDMI Standard HDMI – 19-pin HDMI, video only 45
J25 SPI FCI 89361714LF CBR-1401 or
CBR-1402
2mm 14-pin IDC, 2 or 4
SPX device cable
J26, J27 PC/104 AMP 1375795-2 – – 69
J29 LPT/Floppy FCI 89361720LF CBR-2003 12” 2mm 20-pin IDC
LPT
38
1. Connectors J1 and J28 are for factory use only. Connectors J18 and J21 are not installed.
2. CBR-4405 44-pin to 40-pin adapter is required to connect to 3.5-inch IDE drives with 40-pin connectors.