Instructions / Assembly

-9-

[Fixing Installation Panel]

• Dismantle the metal installation board of the indoor unit. Adjust the installation board

to horizontal position. The height difference between the left and right sides of the

installation board should less than 0.2inch(5mm). (Fig 4)

• Drill holes and insert plastic expansion tubes at the appropriate locations on the wall

and fix the installation board on the wall with M5x30 screws. Ensure that there must

be at least 4 fixed points in the wall. Ensure installation board to horizontal position.

• Drill holes as Fig. 5 shows. The hole, 3.2inch in diameter, should slightly slide down

outwards.

• Cut PVC tubes at a slight angle in the length shorter than wall thickness and inset it into

the hole. (Fig.5)

• Mount the wall cap.

Fig 4

Fig 5

Installation board

Wall

Indoor Outdoor

PVC tube

Wall cap

Small angle