Instructions / Assembly

-7-

• The distance between the indoor unit and the floor should be greater than 7.5ft.

•

The plug shall be accessible after installing the appliance.

• Ensure the distance as required in Fig.1.

• The back of the indoor unit should be close to the wall (Fig.1)

• The all figures are only schematic, and they may be slightly different from the actual

appliances you selected.

[Position for Outdoor Unit]

• Avoid direct sunlight.

• Away from heat source, steam source, leakage of flammable gas, smoke and dust.

• Select a place that is away from rain (snow) and has good ventilation.

• Neighbors will not be affected by the blown wind and noise, or discharged water.

• The place that is easy to install and service.

• Mounted on the solid and reliable foundation will not increase noise or shock.

• To get high cooling performance, make sure the unit's front, rear, left and right sides

must be located in an open area.

• The outlet is proposed to be in open air, any obstacle will affect the performances.

• The installing distance must be required as Fig. 2 shows.

Fig 2

At least 6inch

Blockage

Air inlet

Air outlet

Outdoor Unit

At least 6.6ft

At least 4inch

At least 16inch