User's Guide
Table Of Contents
- Preface
- Chapter 2 SL3 Device
- Components
- To Activate the SL3
- 1. Log into TotalAccess and add the client’s Profile and Service Plan.
- 2. Press the power button once to turn on the SL3.
- 3. Select the left display button to START the process.
- 4. The Device ID and Security PIN will be displayed. Enter the numbers in the client’s Service Plan in TotalAccess.
- 5. TotalAccess communicates with the SL3 device and the device displays Activation Successful to confirm the process.
- To Activate the SL3
- Rechargeable Battery
- To charge the battery
- 1. Insert one end of the power cord into the transformer, and then plug the transformer into a standard wall outlet.
- 2. Insert the USB C end of the power cord into the SL3 device.
- 3. Continue charging the SL3 device until the battery charging icon displays 100%.
- 4. Disconnect the power supply from the SL3.
- To charge the battery
- Cleaning & Storage
- Components
BI SL3 User Guide
8-90-00178-0, Revision 1 © 2020 BI Incorporated BI Proprietary & Confidential v
Preface
BI SL3 User Guide
Copyright © 2020 by BI Incorporated
All Rights Reserved
Printed in USA
BI Incorporated (BI) prepared this manual for use by BI customers only. All
comments concerning the contents of this manual should be directed to the BI
Marketing Department, 6265 Gunbarrel Avenue, Suite B, Boulder, CO 80301,
USA. No part of this manual, covered by copyright, may be reproduced in any
form whether graphically, electronically, or mechanically; including
photocopying, recording, taping, or storage in an information retrieval system
without prior written permission from BI.
Trademarks & Patents
Technical Support
For technical support when using BI’s monitoring center, contact BI
Monitoring Operations:
BI Monitoring Operations
2801 Enterprise Drive
Anderson, Indiana 46013
1-800-693-9120
For technical support when using an agency monitoring center, contact BI
Technical Support:
BI Technical Support
6325 Gunbarrel Avenue, Suite B
Boulder, CO 80301
1-800-241-9924
Waste Electrical and Electronic Equipment
(WEEE)
All electrical products that reach the duration of their functioning
capabilities must be returned to BI Incorporated for recycling.
BI Incorporated Adaptive Facial Recognition
BI logo AFR
BI SL3 BI TotalAccess
BI SL3 logo BI TotalAccess logo