Specifications
1
NMP200
TABLE OF CONTENTS
Front & Rear Panel Features
Setup
Logic Inputs
RS-232 Control
Applications
Specifications & Block Diagram
Warranty
pg. 2
pgs. 3~12
pg. 13
pgs. 14 & 15
pgs. 16 & 17
pg. 18
INTRODUCTION
The ADVANTAGE
®
NMP200 Noise Masking Processor provides a digital pink-
noise generator, a balanced line-level audio input, and a 2-channel DSP
processor, all in a single rack-
space unit. Noise & audio levels, plus two
channels of EQ, gain management, & delay, are adjusted via computer
software. Sixteen presets can be recalled via contact-closures, RS-232, or
other remote control options. The NMP200 carries a five-year warranty.
NMP200 features include:
♦ pink-noise & audio input, with 2-channel DSP processor
♦ noise generator spectral purity (±0.1dB @ 0Hz~20kHz)
♦ precision pink-noise filtering (-3dB per octave low-pass)
♦ extended ‘non-apparent’ repeat time of noise (200 minutes)
♦ combined 1/3-octave & parametric equalization per channel
♦ selectable high & low frequency shelving filters per channel
♦ HPF & LPF with variable frequency & slope per channel
♦ leveling, compression, limiting, & soft-gating per channel
♦ output delay, with distance/delay calculation, per channel
♦ two independent matrixes for channel-to-channel mixing
♦ variable noise, input, & output levels with software metering
♦ sixteen non-volatile memory presets store/recall settings
♦ balanced input & outputs on plug-in barrier strip connectors
♦ software for Windows
®
95/98/NT/2000 & cable included
♦ no manual controls on front panel, to prevent tampering
♦ remote control via RS-232 & programmable logic inputs
♦ accessory units allow control via pots (RCU) or buttons (RT)
♦ incorporates AES recommended grounding practices
♦
marked and UL / C-UL listed power source
♦ covered by Biamp Systems’ five-year warranty