Vocia® CI1 Operation Manual Biamp Systems 9300 SW Gemini Drive Beaverton, Oregon 97008, U.S.A. (503) 6417287 www.biamp.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 11) Only use attachments/accessories specified by the manufacturer. WARNING - To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
TABLE OF CONTENTS CI1 CONTROL INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setup and Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FRONT PANEL .
CI1 CONTROL INTERFACE The CI1 Control Interface is a companion product to the Vocia® LSI16 Life Safety Interface. It facilitates the necessary connections to the LSI16 for standards compliance.
FRONT PANEL The CI1 has three switches on the front panel and an internal (local) sounder, audible through the panel. Local Sounder B9)":4;.:"-4+/C)(";4DD)/;)-"?9)/)E)("./A".:.(D",/5+6"();),E)-"./")F6)(/.:"-,=/.:"3(4D"69)"<()"C)6);6,4/")*+,5D)/6@";4/6(4:"./C" indicating equipment (CIE) or equivalent. It will also commence when any fault is detected. The sounder will continue until the alarm or fault is reset.
REAR PANEL There are four main interconnection paths to the rear panel: !" $4//);6,4/-"64"69)"<()"C)6);6,4/"-A-6)D"J$%KLM !" Connections from external devices for fault indications !" Connections to the LSI16 !" Power supply connections Each of these connection paths has several circuits as detailed below. Fire Detection System (CIE) Connections B9)-)";,(;+,6-".()"5(4E,C)C"4/"6?4"
REAR PANEL Connections from External Devices for Fault Indications B9)-)";,(;+,6-".()"5(4E,C)C"4/"."-,/=:)"
INSTALLATION The CI1 requires one rack space 1.75 inches (44.45mm) high and 19 inches (483mm) wide with 10 inches (254mm) depth. Mounting the unit using four screws with washers will prevent marring of the front panel. PVC or nylon washers are appropriate. Please install the unit away from heat sources, such as vents and radiators, and in rooms with adequate ventilation. Ensure that air can circulate freely behind, beside, and above the unit.
SPECIFICATIONS Control Interface 1 SPECIFICATIONS Alarm Inputs: Dimensions: Assertion: Transition from 0V to 12-24V Fault Inputs: Assertion: Transition from +V to 0V Maximum pull-up resistor: Height: 1.75 inches (44.45mm) Width: 19 inches (483mm) Depth: 10 inches (254mm) Weight: 2.2k Approx 6.4lbs (2.8kg) Ambient Operating Temperature: Outputs: 32-113°F (0-32°C) Compliance: Assertion: FCC Part 15, class B Low Pull-up Load: CE marked max 22k Max.
CI1 WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. BIAMP Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAMP Systems dealer, subject to the terms and conditions set forth below.
COMPLIANCE ! DoC VCI201006! ! ! EC Declaration of Conformity Biamp Systems Corporation, as manufacturer having sole responsibility, hereby declares that the following described product complies with the applicable provisions of the DIRECTIVES below except as noted herein. Any alterations to the product not agreed upon and directed by Biamp Systems Corporation will invalidate this declaration.
COMPLIANCE EU RoHS COMPLIANT This Biamp product, including all attendant cables and accessories supplied by Biamp, meets all requirements of EU Directives 2002/95/EC of January 27, 2003, and 2005/618/EC of August 18, 2005, the EU RoHS Directives. An EU RoHS Materials Content Declaration document may be obtained at www.biamp.
