Manual

Nexia Manual LTR
Status LED blinking
The firmware has attempted to perform an illegal operation. Device
must be power cycled.
Control Dialogs
VC - AEC Input 8 Channel
NEXIA VC hardware is represented in the Layout with as many as seven
separate blocks. Between these blocks can be placed virtually any of the
other available NEXIA mixing, routing, and processing blocks (component
objects). Like other component objects, NEXIA VC blocks can be placed
into the Layout either from the Processing Library
or from the Object
Toolbar. To access VC – AEC Input 8 Channel settings, double-click over
the corresponding block in the Layout. This opens a Control Dialog Box
which provides all available settings.
Device IO indicates which hardware input is associated with that software channel. Gain In
compensates for different input levels (mic or line), and should be set so Peak In flashes only
occasionally (6dB headroom). Phan Pwr assigns +48 Volt phantom power to the input for
condenser microphones. Mute In turns the input signal on/off. Level (dB) In adjusts the relative
input volume. Invert In reverses the polarity of the input signal. AEC turns on/off acoustic echo
cancellation. Adv opens an Advanced dialog. Noise Reduction In selects the amount of
background noise reduction to be applied (6~15dB).
88