Manual

Nexia Manual LTR
Right-clicking over certain settings will provide a menu of
additional options.
signal.
Each NEXIA TC comes pre-configured from the factory with a default system design. If you wish
to load your own custom designed configuration you will need to reset/initialize
the unit(s) first.
TC - Output 4 Channel
NEXIA TC hardware is represented in the Layout with as many as seven
separate blocks. Between these blocks can be placed virtually any of the
other available NEXIA mixing, routing, and processing blocks (component
objects). Like other component objects, NEXIA TC blocks can be placed
into the Layout either from the Processing Library
or from the Object
Toolbar. To access TC – Output 4 Channel settings, double-click over the
corresponding block in the Layout. This opens a Control Dialog Box which
provides all available settings.
Right-clicking over certain settings will
provide a menu of additional options.
Device IO indicates which hardware output is
associated with that software channel. Mute Out
turns the output signal on/off. Level (dB) Out
adjusts the relative output volume. Invert Out
reverses the polarity of the output signal. Full
Scale (dBu) Out selects the appropriate maximum
output reference level (mic or line).
Each NEXIA TC comes pre-configured from the
factory with a default system design
. If you wish to
load your own custom designed configuration you
will need to reset/initialize
the unit(s) first.
Telephone Interface
The NEXIA TC Telephone Interface provides connection and control via a standard analog
telephone line and a desk-set station (see TC Hardware
). The Telephone Interface is represented
by as many as five separate blocks, as determined during placement into the Layout via the
Object Toolbar
. Two primary blocks represent the audio Receive and Transmit functions. Three
optional control blocks may be added individually at any time, representing functions for Dialer,
DTMF Decode, and Control/Status.
100