Manual

System Control
Invert Polarity INPINVRT SET, GET 1 0 =normal
1 = inverted
* Can contain a decimal number.
Note: Nexia SP Line Inputs only support input gain values of 0, 6, 12, & 18 (dB).
Example: Set Device 1 Input Level at Instance ID 6, Input 3 to –10dB.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 1 INPLVL 6 3 None -10 <LF>
Result: SET 1 INPLVL 6 3 –10 <LF>
The following table of Attributes is valid for all Nexia output blocks except Nexia PM Stereo Line
Outputs.
Outputs Attribute Commands Index Value Range
Output
Level
OUTLVL
SET, SETL, GET, GETL,
INC, DEC
2 -100 ~ 0 *
Output OUTMUTE SET, GET 2 0 = unmuted
1 = muted
Output Full
Scale Level **
OUTFS SET, SETL, GET, GETL 2 -31, 0, 6, 12, 18, 24
Invert
Polarity
OUTINVRT SET, GET 2 0 = normal
1 = inverted
* Can contain a decimal number.
Note: Nexia SP Line Outputs do not support the output full scale value of -31 (dBu).
Example: Set Device 2 Output Mute at Instance ID 3, Output 4 to muted.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 2 OUTMUTE 2 None 4 1 <LF>
Result: SET 2 OUTMUTE 3 4 1 <LF>
173