Manual

Nexia Manual LTR
In the Word document, select Show Gridlines from the Table menu. Each large cell represents
a label. The first four columns are 'left-justified' to create labels for Volume 8 and Select 8
panels, as well as for the 'Volume' (left) section of Volume/Select 8 panels. The last column is
'right-justified' to create labels for the 'Select' (right) section of Volume/Select 8 panels. Left-
click inside any large cell, and begin typing. Use 'Enter' to begin a new line, and again to leave
a blank line. To avoid printing errors, do not change line-spacing or other formatting
parameters. However, if you do not have the default font (Helvetica), or if you wish to change
label appearance, you may select a different font before typing.
Features
The NEXIA family of digital signal processors (DSP) is designed with application specific inputs
and outputs (I/O), but with much more power than comparable analog products. Intuitive drag-
and-drop software allows for easy configuration and maximum flexibility. Setup and control is
achieved utilizing Ethernet ports. NexLink ports allow up to four NEXIA units (any models) to be
used together in the same system, providing totally different combinations of functionality.
NEXIA CS has 10 mic/line inputs and 6 independent mix outputs, and is intended for a variety of
conferencing applications such as boardrooms, courtrooms, and council chambers.
NEXIA PM has 4 mic/line inputs, 6 stereo line inputs, and 6 line outputs, and is intended for multi-
media presentation applications requiring both microphone and program content.
NEXIA SP has 4 line inputs and 8 independent mix outputs, and is intended for speaker
processing applications requiring line inputs feeding a larger number of discrete outputs.
NEXIA VC has 8 wide-band AEC mic/line inputs, 2 standard mic/line inputs, 4 mic/line outputs,
and a codec interface, and is intended for a variety of videoconferencing applications such as
boardrooms, courtrooms, and council chambers.
NEXIA TC has 8 wide-band AEC mic/line inputs, 2 standard mic/line inputs, 4 mic/line outputs,
and a telephone interface, and is intended for a variety of teleconferencing applications such as
boardrooms, courtrooms, and council chambers.
NEXIA software includes a broad selection of audio components, routing options, and signal
processing. The internal system design is completely user definable via PC software, and can be
controlled via dedicated software screens, RS-232 control systems, and/or a variety of optional
remote control devices.
Architect's & Engineer's Specifications
20