Vocia® VAM-1 Manual January 2013 Biamp Systems, 9300 SW Gemini Drive, Beaverton, Oregon 97008 U.S.A. (503) 641-7287 www.biamp.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this product near water. 6) Clean only with dry cloth. 7) Do not block ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other product (including amplifiers) that produce heat.
TABLE OF CONTENTS VOCIA AUXILIARY MICROPHONE 1 (VAM-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation. . . . . . . . . . . . . . . . . . . . . . .
VOCIA AUXILIARY MICROPHONE 1 (VAM-1) The Vocia Auxiliary Microphone 1 (VAM-1) device is an independent microphone assembly that functions as a slave device to the Vocia Wall and Desk Station (WS-4/10 and DS-4/10) series microphones and to the Vocia Input 6 (VI-6) for paging via the Paging Ports. Up to four VAM-1 slave microphones can be connected per VI-6. The VAM-1 incorporates a Push-to-Talk (PTT) switch and has LED indication of the Wait, Talk Now and Unavailable paging states.
VOCIA AUXILIARY MICROPHONE 1 (VAM-1) Setup and Use The Vocia software provides the interface for configuring and programming the VAM-1. The information supplied by this manual relates to hardware installation, physical connections, and device information. For more details on software setup, please consult the Vocia Software Help File. Model VAM-1 BIAMP SYSTEMS Made in USA, US and Imported Parts To Host Direct connection to Paging Station or VI-6. Not Ethernet - do not connect to switch or PoE.
VOCIA AUXILIARY MICROPHONE 1 (VAM-1) LED Indicators when used with Paging Station The VAM-1 has two bi-colour status LEDs visible when the microphone is lifted from the cradle.
VOCIA AUXILIARY MICROPHONE 1 (VAM-1) LED Indicators when used with VI-6 The VAM-1 has two bi-colour status LEDs visible when the microphone is lifted from the cradle.
VOCIA AUXILIARY MICROPHONE 1 (VAM-1) Vocia Auxiliary Microphone 1 SPECIFICATIONS Microphone Frequency Response (1cm): +0, -1dB, 20Hz to 10kHz Microphone Type Dynamic microphone with dual transducer (un-monitored) THD + N (20Hz to 10kHz) <0.08% Effective Input Headroom 30dB System Headroom 18dB Maximum Input 125dB SPL Microphone Cord Length (extended) 4 ft (1200mm) Nominal Input Level: -45dBu Nominal Output Level: -10dBu Frequency Response: +0, -1dB, 20Hz to 10kHz Total Harmonic Distortion and Noise: <0.
WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. BIAMP Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAMP Systems dealer, subject to the terms and conditions set forth below.
FCC COMPLIANCE FCC NOTICE - CLASS B DIGITAL DEVICE NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential as well as in a commercial installation.
COMPLIANCE DoC VAM201207 EC Declaration of Conformity Biamp Systems Corporation, as m anufacturer having sole responsibili ty, hereby declares that our delivered version the following described pro duct complies w ith the applicable provisions of the DIRECTIVES below except as noted herein. Any alterations to the product not agreed upon and directed by Biamp Systems Corporation will invalidate this declaration.
COMPLIANCE EU RoHS COMPLIANT This Biamp product, including all attendant cables and accessories supplied by Biamp, meets all requirements of EU Directives 2002/95/EC of January 27, 2003, and 2005/618/EC of August 18, 2005, the EU RoHS Directives. An EU RoHS Materials Content Declaration document may be obtained at www.biamp.