Vocia® WR-1 Operation Manual January 2012 Biamp Systems, 9300 SW Gemini Drive, Beaverton, Oregon 97008 U.S.A. (503) 641-7287 www.biamp.
TABLE OF CONTENTS VOCIA WALL REMOTE 1 (WR-1) FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FRONT VIEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Setup and Use. . . . . . . . . . . . . . .
VOCIA WALL REMOTE 1 (WR-1) The WR-1 is a networked wall remote for use in a Vocia® system. It is designed to control background audio in user-configured music zones. The WR-1 utilizes Power over Ethernet (PoE) technology. Once it is configured with Vocia® software interface, the WR-1 requires nothing more than an Ethernet cable wired to a PoE-compliant network switch. The WR-1 allows the user to choose background music input sources, paging inhibit and source mute from an attractive wall-mounted panel.
WR-1 FRONT VIEW Setup and Use The Vocia software provides an intuitive interface for configuration, DSP equalization, and programming of the WR-1. The information supplied by this manual relates to physical connections and assignment. For more details on software setup, please consult the Vocia Help File.Front Panel Display The WR-1 features a backlit display that provides the user with an easy-to-read interface to view the menu options and setup screen.
WR-1 FRONT VIEW Volume Mute Screen This screen provides muting control for the current background source. The LCD shows Volume Mute at the top with On or Off displayed in the lower center of the screen. When Volume Mute is on, the background source is muted and the current background volume setting is stored. The volume setting will be restored when the mute is off. Page Inhibit Screen This screen will display Page Inhibit at the top with On or Off displayed in the lower center of the screen.
WR-1 REAR VIEW Device ID Network Connection Device ID The rotary ID switches are located on the rear of the WR-1 and give the unit a unique Device ID. The switches are in hexadecimal format. All WR-1 units must have a unique Device ID to function properly within a Vocia Paging World (i.e., it is not possible to have two WR-1 units with the same Device ID of hex 07). To assign a Device ID of hex 07, turn the LSB switch to 7 and leave the MSB switch on 0.
WR-1 REAR VIEW This connection carries control data and power over CobraNet. PoE-enabled network switches or PoE midspan adapters must be used to power the WR-1. These must be 802.3af compliant and must be isolated with respect to ground. The maximum distance between any unit and an Ethernet switch is 100 meters (328 feet) when using copper cabling. Additional Ethernet switches and/or fiber-optic cable can be used to further extend distances between units on a network.
WR-1 SPECIFICATIONS Wall Remote 1 SPECIFICATIONS Connection: Dimensions: Front: Height: Width: Depth: Within Wall Height: Width: Depth: RJ45 with shielded Ethernet/PoE cable (CAT5, CAT5e, CAT6 or CAT7) Power: 802.3af (PoE) Class 1 Ambient Operating Temperature Range: 32-113 degrees F (0-45 degrees C) Compliance: 6 inches (153mm) 5.1 inches (130mm) .6 inches (15.4mm) 2.9 inches (73.5mm) 2.4 inches (60mm ) 1.2 inches (30mm) (from front surface).
WR-1 WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. BIAMP Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAMP Systems dealer, subject to the terms and conditions set forth below.
FCC COMPLIANCE FCC NOTICE - CLASS B DIGITAL DEVICE NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential as well as in a commercial installation.
COMPLIANCE ! DoC VWR201003! ! ! EC Declaration of Conformity Biamp Systems Corporation, as manufacturer having sole responsibility, hereby declares that the following described product complies with the applicable provisions of the DIRECTIVES below except as noted herein. Any alterations to the product not agreed upon and directed by Biamp Systems Corporation will invalidate this declaration.
COMPLIANCE EU RoHS COMPLIANT This Biamp product, including all attendant cables and accessories supplied by Biamp, meets all requirements of EU Directives 2002/95/EC of January 27, 2003, and 2005/618/EC of August 18, 2005, the EU RoHS Directives. An EU RoHS Materials Content Declaration document may be obtained at www.biamp.