User's manual
Congratulations on your BIBO purchase! Congratulations and thank you for buying a BIBO. You are moments away from enjoying pure, iltered water – boiling and chilled – at the touch of a button. We want you to get the most from your BIBO, so before you use it please read this manual carefully. If you have any queries once your BIBO is up and running, please irst refer to this manual, it will provide you with helpful and practical advice.
Contents Meet your BIBO page 4 • BIBO overview • The touch screen panel Safety Information page 6 Using your BIBO page 8 • • • • Initial connection to the electrical supply Important: before using your BIBO for the irst time Main features Menu options and personal settings BIBO information and maintenance • • • • • • • How to replace the ilters How to clean your BIBO Going on holiday Moving house Technical information Troubleshooting Warranty Installing your Bibo • • • • • • page 16 page 22 Ov
Meet your BIBO BIBO overview 1. Touch screen panel 4 9. Refrigeration condenser 2. Drip tray cover 10. Hot tank switch 3. Removable drip tray 11. Water inlet 4. 7cm TFT LCD screen 12. Rear panel 5. Water outlets 13. Cooling fan 6. Front panel 14. Mains fuse 7. Overlow reservoir 15. Power switch 8. Lid 16.
The touch screen panel 7 1 2 3 4 5 6 10 15 14 11 01-02-2013 8 9 1 2 13 12 17 16 3 4 5 6 01-02-2013 UV ilter status icon Child lock status icon 7 8 Hot water key (also acts as ‘select’ key in menu mode) 9 Extra hot water key 13 10 Ambient (mixed hot and cold) water key Cold water key (also acts as ‘select’ key in menu mode) 14 Heating and hot water temperature bar Power saving mode icon Automatic on/off icon Clock (24 hour) Calendar (Day Month - Year) 11 12 A cup of
Safety Information IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: FOR CORRECT OPERATION OF THIS APPLIANCE IT IS ESSENTIAL TO OBSERVE THE MANUFACTURER’S INSTRUCTIONS. • Your BIBO is intended to be used in household and similar applications such as: • • farm houses; • by clients in hotels, motels and other residential type environments; • bed and breakfast type environments.
BIBO BRIGHTER WATER 7
Using your BIBO Initial connection to an electrical supply Once your BIBO has been plugged in to a power supply, the screen will initially display your BIBO logo; this means it is operating correctly. Select your preferred language and then follow the instructions on the screen, adding hot and cold water to the respective tanks. (Once the tanks are full, water will low from the outlet at the front of the dispenser.) 1. 2. 3. 4. 5. 6.
Main features To dispense hot water: Your BIBO has a safety lock so you must irst touch stop the water. If you require near-boiling water touch 1. then touch Hot water will low until you touch any key to the dispenser will display the following: 2. Once boiling has inished you can dispense water from your BIBO. To dispense cold water Touch then cold water will low until you touch any key to stop the water.
To dispense a measured cup of hot or cold water Touch then touch either or please see page 11 of this manual. for a measured cup of hot or cold water. To set the amount of water dispensed, 1. 2. 3. Menu options and personal settings To enter the menu touch on the panel, then follow the on-screen prompts.
Water quantity settings Select the water quantity (QTY) setting in the menu then follow the screen prompts to set the hot, cold and ambient (mix) water quantities as follows: 1. 2. 3. 1. Water quantity setting 2. ‘Hot’ water quantity setting 4. 3. ‘Cold’ water quantity setting 4. ‘Ambient’ water quantity setting Time setting (day - month - year) Select Calendar settings and enter the time adjustment screen.
1. 2. 3. 4. Power on/off mode Power on/off mode allows you to set your BIBO to come on and go off at different times of day – exactly like your cairconditioning. There are three timed ‘periods’ available when your BIBO can switch itself on then off again. Select the ‘Power’ option in the menu; touch the the key to scroll down to the ‘Power on/off ’ option.
If you want to turn your BIBO on before the programmed time, touch any key and the screen will display this: Touch the key to conirm you want it to turn on. When your BIBO switches back on from the ‘Power on/off ’ mode, the hot tank will take approximately 5 minutes to heat back up to the maximum temperature and the cold tank will take approximately 15 minutes to chill back down to the minimum temperature. Child lock setting To set the extra ‘Child lock’, select the ‘Child lock’ option from the menu.
Language settings You can change the operating language of your BIBO at any time by choosing ‘Language’ from the main menu and selecting your preferred language from the options available. 1. 2. Ring/beep setting You can programme your BIBO to beep every time a key is pressed by choosing ‘Ring’ from the main menu, and selecting whether you want it on or off. 1. 2. Restore factory settings To restore all settings to factory settings, choose ‘Restore’ from the main menu and then choose ‘ON’. 1. 14 2.
BIBO information and maintenance Replacing the MAXI filter cartridge BIBO’s MAXI ilter should be replaced every 6 months. When the ilter needs replacing, your BIBO’s display will alert you. This message will appear once replacement is due: Remove the lid on the top of your BIBO by simply lifting it off. It is best to lift the lid from the back irst. You will see the tops of the two white ilters on the right hand side.
Performance Data Sheet- MAXI Filter Cartridge Reorder Code: MAXI Filter Cartridge Manufacturer: BIBO Water Pty Ltd, Level 14, Tower 2, 101 Grafton St, Bondi Junction, NSW IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs. It is recommended that you have your water supply tested to determine your actual water treatment needs.
Replacing the UV filter lamp The UV lamp should be replaced once a year. When it needs replacing, BIBO’s display will alert you. This message will appear once replacement is due: When your BIBO was installed you received a key to release the UV lamp. Put the key into the slot indicated above, release the latch to ’OPEN’ (moving the key towards yourself if necessary), and whilst holding the key in position rotate the UV lamp anti-clockwise.Pull the UV lamp up and out of your BIBO.
Once the UV lamp has been replaced, select ‘Replacement’ from the menu, select ‘UV’ and touch the replacement. The counter will be reset to ‘360 days left’. to conirm Safety information: • This appliance contains a UV-C emitter. Unintended use of the appliance or damage to the housing may result in the escape of dangerous UV radiation. UV radiation may, even in little doses, cause harm to the eyes and skin. • If your BIBO is damaged, immediately unplug and do not use.
When you come back: 1. Turn on the water supply to your BIBO by twisting the blue tap so the lever is in line with the water pipe. 2. Turn the hot tank switch at the back your BIBO to on (‘1’). 3. Touch the hot water key 4. The hot water tank will now begin heating. 5. It is a good idea to rinse fresh water through both tanks so remove the drip tray and place a jug or similar container of at least 2l litres capacity under the taps then follow steps 6 and 7 below. 6. Touch the cold key 7.
Technical information SPECIFICATION PARAMETER Electrical speciication Voltage 240 Volts Frequency 50 Hertz Power rating Heating system 1,700 Watts Power rating 1,500 Watts Heating capacity 15 Litres/hour* 70-96ºC (Adjustable) Hot water temperature Chilling system Refrigerant R134a Power rating 138 Watts Cooling capacity 5 Litres/hour* 4-16ºC (Adjustable) Cold water temperature Filtration system Activated carbon ilter UV ilter Inlet water pressure 1 Micron Minimum-Maximum 150-600 kPa
Troubleshooting If a fault should occur, please irst use the troubleshooting guide below to determine the fault type, then follow the steps listed to resolve the issue. This should help you resolve the fault with minimum effort. If you ind that your BIBO is not working properly, or if the problem persists, your BIBO may need to be professionally serviced. Please contact us at help@bibowater.com.au or call 1300 00 BIBO to speak to one of our team.
Installing your BIBO We strongly recommend that one of our professional BIBO Service Technicians installs your BIBO to ensure compliance with AS/NZS 3500.4 and any applicable local plumbing and electrical regulations. Should you wish to arrange installation yourself we recommend using a plumber or other suitably qualified person. For any questions about installation please call us on 1300 002 426. SAFETY TIPS Your BIBO weighs 15Kgs so please take care when lifting it from its box.
CONNECTION TO YOUR BIBO 10. Carefully drill an 8mm hole through the bench top about 5cm (2”) out from the wall directly behind where your BIBO will be located. (NOTE: if the bench top is granite or similar a diamond drill bit is required and we recommend this task is carried out by our Service Technician or another suitably qualified person). 11. Feed the long length of ¼” pipe from underneath the cupboards up through the 8mm hole. (Picture 3) 12.
www.bibowater.com.
