User Manual
18 USER’S MANUAL
Once the UV lamp has been replaced, select ‘Replacement’ from the menu, select ‘UV’ and touch the
replacement. The counter will be reset to ‘360 days left’.
Safety information:
• This appliance contains a UV-C emitter. Unintended use of the appliance or damage to the housing may result in the
escape of dangerous UV radiation. UV radiation may, even in little doses, cause harm to the eyes and skin.
• If your BIBO is damaged, immediately unplug and do not use.
•
•
•
• WARNING:
I
on our website at
Cleaning your BIBO
Clean your BIBO by simply wiping it down with a damp cloth. Soap or any other gentle detergent can also be used if you
wish. The drip tray can be removed and cleaned in your dishwasher.
CAUTION: To prevent damage to your BIBO do not use alkaline cleaning agents when cleaning, use a soft cloth and a
mild detergent. Furthermore, please do not use harsh detergents, concentrated washing up liquid or solvents to clean your
BIBO. Avoid using anything abrasive (such as steel brushes, scourers etc) to clean the body as it will scratch.
It is very important that you do not wet the back of the machine whilst cleaning - remember it is
connected to an electrical supply.
Preparing your BIBO for when you are going on holiday
If at all unsure how to proceed please call us on 1300 00 BIBO and ask to speak to one of our installers.
Before you go:
1. Turn the hot tank switch located at the back of your BIBO next to the power switch to off (‘0’) (Do not switch off the
power switch as this may affect your BIBO settings).
2. Turn off the water supply to your BIBO by twisting the blue tap at the back of your BIBO so that the lever is at right
angles to the white water pipe.