SDS
BIC Utility Lighter SAFETY DATA SHEET January 2, 2020
according to the HCS/HazCom 2012 (29 CFR § 1910.1200)
Page 6 of 6
SECTION 13 – DISPOSAL CONSIDERATIONS
Waste Disposal Method:
In accordance with local, provincial/territorial or federal guidelines and regulations
SECTION 14 – TRANSPORT INFORMATION
Shipping name
UN
Number
Hazard Class
PG
DOT (US)
LIGHTERS
1057
2.1
--
DOT- Department of Transport
SECTION 15 – REGULATORY INFORMATION
OSHA Classification: (OSHA Hazard Communication Standard (29 CFR §1910.1200))
The liquefied petroleum gas has been classified in accordance with the hazard criteria of the OSHA’s
HCS/HazCom 2012 and the SDS contains all the information required by the 29 CFR § 1910.1200. The
packaged product exhibits a lesser hazard due to the predominance of packaging.
Hazard Ratings for the liquefied petroleum gas fuel
NPCA/HMIS NFPA 704
Health: 1 1
Flammability: 4 4
Reactivity: 0 0
NPCA/HMIS – National Paint and Coatings Association/ Hazardous Materials Identification System
NFPA – National Fire Protection Association
1. The components in this product are listed on the TSCA Inventory or are otherwise exempt from TSCA.
2. Some plastics in this product may form formaldehyde gases during their combustion. Formaldehyde is
considered to be a carcinogen by the State of California (California Proposition 65) if exposure to it exceeds
the No Significant Risk Level (NSRL)- Safe Harbor Level (40 micrograms/day).
3. ASTM F2201-02 (Standard Consumer Safety Specification for Utility Lighters).
4. ISO 22702 (Utility Lighters – Safety Specification).
5. U.S. Safety Standard for Utility Lighters, 16 CFR Part 1212 (December 22, 1999).
SECTION 16 – OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST
REVISION
Preparation Date: January 2, 2020
Supersedes Date: June 11, 2019
Disclaimer: The information given is based on data currently available to us and is believed to be correct.
No warranty is expressed or implied regarding the accuracy of this data or the results obtained from the use
thereof. No responsibility is assumed for injury or damage from the use of the products described herein.