Data Sheet

ManualsBrandsBicker Elektronik ManualsTester AccessoriesBicker Elektronik BP-LFP-1325D BP-LFP-1325D Battery pack Long-life battery pack for UPSI-2406D 1 pc(s)

NEW

BP-LFP-D

LiFePO4 battery packs (DIN rail)

 Long-life battery pack

 High reliability

 Safe lithium iron phosphate technology

 100 % free of lead and cadmium

 Extended temperature range

 High performance BMS system

 Advanced charging algorithms and cell balancing

 Battery relax mode for lifetime extension

 Integrated protection against deep discharge,

over current, over voltage and short circuit

 Ruggedly constructed DIN rail version

Nominal capacitance 2500 mAh

Technology LiFePO4 (Lithium iron phosphate)

Life cycles > 6000

Temperature Operating: -20…+55 °C / Storage: -30…+55 °C

Communication SMB

Bicker Elektronik GmbH | 86609 Donauwörth | Germany

Tel. +49 906 70595-0 | info@bicker.de | www.bicker.de

Delivery

YEARS

Delivery

YEARS

Technical data

UPS systems

DC UPS

Extended

Product specific data

P/N BP-LFP-1025D BP-LFP-1325D

UPS version UPSI-1208D UPSI-2406D

Nominal voltage 9.9 V DC 13.2 V DC

Number of used cells 3 cells à 3.3 V (serial) 4 cells à 3.3 V (serial)

Energy 25 Wh 33 Wh

ESR 45 mΩ 64 mΩ

Charge voltage 10.8 V max. 14.4 V max.

Charge current 4.5 A max. 4.5 A max.

Discharge current 15 A max. 15 A max.

Fuse Littlefuse 1206, 25 A Littlefuse 1206, 25 A

Dimensions (Wx D x H) 45 x 100 x 120 mm ±0.5 mm 45 x 100 x 120 mm ±0.5 mm

Weight (net) ~ 450 g ~ 535 g

Nominal backup time, measured at +21 °C

50 W 100 W 140 W

BP-LFP-1025D ~ 25 min ~ 12 min –

BP-LFP-1325D ~ 33 min ~ 16 min ~ 12 min

Back up time depends on battery capacitance, load and temperature.

At very high or low temperatures a reduction of backup time occurs.

Summary of content (5 pages)

PAGE 1
UPS systems YEARS YEARS 5 5 BP-LFP-D Delivery Delivery Extended Extended LiFePO4 battery packs (DIN rail) Long-life battery pack High reliability Safe lithium iron phosphate technology 100 % free of lead and cadmium Extended temperature range High performance BMS system Advanced charging algorithms and cell balancing Battery relax mode for lifetime extension Integrated protection against deep discharge, over current, over voltage and short circuit  Ruggedly constructed DIN rail version     
PAGE 2
UPS systems Drawing BP-LFP-D Tolerance ±0.5 mm 9 mm 45 mm 100 mm 120 mm BP-LFP ENERGY PACK 45 mm ENERGY PACK 5.5 mm LiFePO4 CELLS 2x BAT+ AWG18 2x GND AWG18 1,2 BAT+ 3,4 GND SMBC SMBD SYSPRES SGND DC UPS 2 4 6 8 4x AWG26 Safety information Please consider to each country’s own regulation about recycling and disposal of used batteries etc. in hazardous waste or resending to any recycling organization.
PAGE 3
UPS systems Backup time BP-LFP-1025D Nominal backup time vs. P out Pout BP-LFP-1025(D): Backup (me nominal vs. 200 180 Backup time [min] Backup (me [min] 160 140 120 100 80 60 40 20 0 0 10 20 30 40 50 Pout [W] 60 70 80 90 100 Pout [W] Backup time BP-LFP-1325D Nominal backup time vs. P out Pout BP-LFP-1325(D): Backup (me nominal vs.
PAGE 4
UPS systems BP-LFP-D – LiFePO4 cell specifications SPECIFICATION VALUE Nominal Voltage 3.3 V Nominal Capacity 2.5 Ah Maximum discharge current - continuous (A) 40 A Pulse discharge at 10 sec 70 A Recommended standard charge 4 A to 3.5 V Recommended fast charge 10 A to 3.5V Recommended float charge voltage 3.5 V Recommended end of discharge cutoff 2.
PAGE 5
UPS systems BP-LFP-D – Cycle life at various temperatures Capacity fade (% of BOL capacity) 100 % Cell Type: 2.5 Ah cylindrical Cell cycles / year: 363 kWh / year: 2.72 SOCavg: 57.5 % 95 % 90 % 85 % 80 % 75 % 0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 Cycle number BP-LFP-D – Calendar life at various temperatures Capacity fade (% of BOL capacity) 95 % 90 % DC UPS Specification is subject to change without notice. Errors excepted. Status as at: 12.09.