Instructions
Table Of Contents
- Index
- A Brief specification
- B Intended use
- C Technical Data
- D Name / Address / Support E-Mail / Phone number of the manufacturer
- E General Data
- E1 Assembly and installation advice
- E2 Convection and installation position
- E3 Description of connectors
- E4 Dimensioning the upstream power supply
- E5 Initial operation
- E6 Connection
- E7 Overview connector / counterpart with description / Scope of delivery
- E8 Charging time
- E9 Reverse polarity / Overload / Short circuit
- E10 Backup time
- E11 Behaviour in case of exceeding maximum backup time
- E12 Status LED
- E13 Software
- E14 Recommendations for a long UPS service life
- E15 Maintenance
- E16 Disposal
- E17 Disclaimer
- E18 Preventive measures and rules when operating the UPS system
UPSI-2406DP1 | UPSI-2406DP2
Revision 1-3
14
ENVIRONMENTAL CONDITIONS – UPSI-2406DP1 / UPSI-2406DP2
Ambient temperature (operation) DP1: 0…+50° C / DP2: -20… +65° C
Ambient temperature (start up without load) DP2: -30° C
Ambient temperature
(storage / transport)
DP1: -20…+50° C / DP2: -30…+65° C
Max. permitted humidity ≤95 % (at 25° C, no dew)
Installation height ≤4000 m
Climate class 3k3 (EN 60721)
Degree of pollution 2
Overvoltage category
EN 61010-1
EN 61010-2-201
I
I
Indoor / Outdoor use Yes / Yes (in housing)
STANDARDS
Protective extra-low voltage IEC 61010-1 (SELV)
IEC 61010-2-201
APPROVALS
UL ETL, UL61010-1
ETL, UL61010-2-201
CSA CSA C22.2 61010-1-12
CSA C22.2 61010-2-201
CB Scheme IEC 61010-1
IEC 61010-2-201
Electromagnetic compatibility / Conformity according to EMC directive 2014/30/EU
Emitted interference according to EN 61000-6-3 (commercial and residential areas)