Owner's manual

ManualsBrandsBICO ManualsEquipmentBadger Crusher

BICO BADGER 5" X 7" JAW CRUSHER

OPERATING INSTRUCTIONS

The Bico Badger Jaw Crusher is designed to give long and efficient service. In order to

secure the long life and excellent performance, which your crusher is capable of

delivering, it is essential that the following directions for operating and maintenance be

carefully observed.

The combination of Flat Faced Pulleys as supplied with V-belts on the BADGER was a

specially engineered arrangement for this machine. This combination has been in use for

many years in the manufacturing of this crushing equipment and has proven to be the

very best arrangement for machines such as these. When equipment is confronted with a

"SHOCK LOAD" condition, this safety factor allows just enough necessary "GIVE", and

prevents undue strain of metal-to-metal contact of the key, flywheel and eccentric shaft.

EYE, HEARING & DUST PROTECTION REQUIRED DURING OPERATION

Summary of content (5 pages)

PAGE 1
BICO BADGER 5" X 7" JAW CRUSHER OPERATING INSTRUCTIONS The Bico Badger Jaw Crusher is designed to give long and efficient service. In order to secure the long life and excellent performance, which your crusher is capable of delivering, it is essential that the following directions for operating and maintenance be carefully observed. The combination of Flat Faced Pulleys as supplied with V-belts on the BADGER was a specially engineered arrangement for this machine.
PAGE 2
INSTALLATION If the crusher is not supplied with the optional stand and ore pan, then the machine should be mounted securely, making sure there is adequate clearance underneath for sample or material removal. A licensed electrician according to all local codes and ordinances should do electrical installation. MACHINE ROTATION: Drive Wheels should rotate towards feed opening.
PAGE 3
MAINTENANCE MAKE SURE THE UNIT IS DISCONNECTED FROM POWER BEFORE SERVICING OR ACCESSING THE CRUSHER Greasing is very important; with regular servicing it will extend the life of the machine. Recommended heavy-duty #2 grease. 1. The jaw must be greased once every eight (8) hours of operation on the two nipples of the movable jaw above toggle and below motor base. 2. Grease the two (2) side bearing nipples located on either side of the crusher. The nipples have been extended up to make servicing easier.
PAGE 4
BICO INC.
PAGE 5
BICO INC. BADGER JAW CRUSHER PARTS CATALOG# B-57 B-130 B-140 B-146 B-150 WD-126 VD-129B VD-132 DESCRIPTION DUST COLLECTION BASE & ORE PAN COMBINATION FLYWHEEL (2 REQUIRED) SAFETY GUARDS (SET OF 2) FEED HOPPER CAP SCREW F/ B-3 (1 REQ.) CAP SCREW F/B-10 (2 REQ.