Bietrun® WXM30 UHF Professional 8-Channels Rechargeable Wireless Microphone System User manual If you have any questions, please feel free to contact us. E-mail: amazon@bietrun.
1. Product introduction This UHF Professional 8-Channels Rechargeable Wireless Microphone System uses UHF frequency band transmission, which has the characteristics of long transmission distance, strong anti-interference ability, low delay, and clear sound quality. It is easy to use and operate. Note: Please read and follow all warnings carefully before use, and keep this manual for subsequent use. 2. Product description Microphones ① Display ⑥ CH 1 CH 2 botton ⑤ CH 3 CH 4 ② No.
Press this button to adjust the channel. ④ Channel ⑤ Charging port External DC 5V power supply charges the product. ⑥ Indicator light (1)Green: microphone is on; (2)Red flash: low power; (3)Red: charging; Red light is off when fully charged. Press this button to switch channels when the connection is unstable. (1)Charge it once before your first use; (2)Charge it with low power.
Back ㉗ ⑭ ⑮ No. ⑱ Part Name ① ②③ ④⑤ ⑥⑦⑧⑨ ⑩⑪⑫⑬ ⑭⑮ ⑯⑰ Power ⑲ ⑳ ㉑ ㉖ ㉒ Function Description Short press to turn on, long press to turn off ㉓ ㉔ ㉕ ⑯ ⑰ Notes When the mic is not turned on, the "--" on the display of the channel flashes in sequence. Channel Display Display connection information of Microphone 1-8 volume Adjust volume of mic 1-8:Turn left to decrease the volume, turn right to increase the volume.
21 ⑱⑲⑳○ ㉒㉓㉔㉕ Microphone Output XLR output port of mic 1-8 ㉖ 6.35mm audio output ㉗ Charging port Input voltage is DC 12V 6.35mm audio output interface This port only outputs the audio signal of its own microphone The audio is a mixture of microphone 1-8 Please use the adapter provided with the product 3. Connection 3.1 Input Connection When the microphones and receiver are turned on, They will be automatically paired. 3.2 Output Connection Audio amplifier devices with XLR interface, 6.
XLR Mixing console XLR 6.
Note: XLR audio output and 6.35mm output can not be connected to the same devices, otherwise the sound may not be played normally. 4. FAQ No. 1 2 3 4 5 6 Problems Solutions Receiver can’t be (1)Check whether the power is turned on, turned on (2)Check whether the adapter and cable are connected with the receiver correctly and firmly. Microphones (1)Charge first and check whether the mic charging indicator is on; can’t be turned (2)Short press the power button to turn on.
Receiving frequency: U Band Frequency stability: <0.005% Sensitivity: 2mV Interference frequency ratio > 90dB Image interference ratio: >88dB Signal to noise ratio: >95dB Audio output: 800mV-1.4V Working range: Standard conditions 30 to 50 m Receive channel: 4 Supply Voltage: DC 12V Power consumption: 3W Antenna: universal antenna Handheld Transmitter Carrier frequency: U Band Transmit power: 10mW Frequency stability: <0.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.