Installation Guide

BIG ASS FAN 400

12. Secure the safety cable

Loop the safety cable around the mounting bracket, and then secure it with the safety cable shackle as shown.

Note: If you are installing the fan in Canada, the safety cable must be secured to an existing part of the building structure instead of the

outlet box. Examples of acceptable building structures include a wooden beam or a metal mounting brace secured between two beams.

In some cases, it may be necessary to install additional structural material to provide attachment points.

13. Install the canopy

After connecting the fan’s power supply, raise the canopy to the mounting bracket, lining up the four holes on the canopy to the holes on

the bracket. Secure the canopy to the mounting bracket with the (4) painted M4 x 6 mm screws. Ensure no wires or the safety cable are

showing. Test the fan.

Safety

Cable

Canopy

Installation (cont.)