Installation Guide

WWW.BIGASSSOLUTIONS.COM © 2015 DELTA T CORP. ALL RIGHTS RESERVED.
4
Hardware
Verify you have all of the following required hardware before beginning the installation process. If you are missing
any piece required for installation, contact Big Ass Fans Customer Service.
Mounting Hardware
Mounting Hardware
1,2
• (5) M10 x 40 mm Hex
Head Cap Screws
• (9) M10 Flat Washers
• (5) M10 Nylock Nuts
Extension Tube Hardware
2
• (3) M10 x 90 mm Socket
Head Cap Screws
• (5) M10 Flat Washers
• (3) M10 Nylock Nuts
Main Fan Unit Hardware
2
• (3) M8 x 75 mm Socket
Head Cap Screws
• (5) M8 Flat Washers
• (3) M8 Nylock Nuts
Airfoil Hardware
Airfoil Hardware
2
• (13) M8 x 18 mm Socket
Head Cap Screws
• (13) 8 mm Belleville Washers
Airfoil Tip Hardware
2
• (7) M5 x 12 mm Button
Head Screws
Safety Cable, Cover Plate, & Lower Cover Hardware
Safety Cable Hardware
• 5/16” Clevis Pin
• Cotter Pin
• Gripple®
Cover Plate Hardware
2
• (3) 8-32 x 1/2” Flat
Head Screws
Lower Cover Hardware
2
• (4) 8-32 x 3/8” Pan
Head Screws
• (9) 6-32 x 3/8” Pan
Head Screws
1. Square washers are included for mounting the fan to angle irons. The number of square washers used depends on the number of angle irons used.
2. One extra of each piece of hardware is included.