Installation Guide

Power Supply

110–125 VAC 1 Φ

10 A 50/60 Hz

Controller

Input Cable

CAT5 Cable

To wall

controller

Wall Controller

Power Supply

Cable

L1/AC LINE BLACK

PE/GROUND GREEN OR BARE COPPER

L2/AC NEUTRAL WHITE

WHITE

GREEN

BLACK

BLUE YELLOW

WIRING DIAGRAMS & ELECTRICAL GUIDELINES

WARNING: To reduce the risk of electric shock, wiring should be performed by a qualiﬁed electrician!

Incorrect assembly can cause electric shock or damage the motor and the controller! Hazard of electrical

shock!

WARNING: The installation of a Big Ass Fan must be in accordance with the requirements speciﬁed in this

installation manual and with any additional requirements set forth by the National Electric Code (NEC),

ANSI/NFPA 70-2014, and all local codes. Code compliance is ultimately YOUR responsibility!

CAUTION: The product warranty will not cover damage or failure caused by improper installation.

WARNING: Exercise caution and common sense when powering the fan. Do not connect the fan to a

damaged or hazardous power source. Do not attempt to resolve electrical malfunctions or failures on

your own. Contact Big Ass Fans if you have any questions regarding the electrical installation of this fan.

Wiring Diagram

Controller Input Cable

White +0–10 VDC Speed Ref.

Brown Not Used

Orange Status LED (+)

Yellow

Run Enable

Closed: Enable; Open: Disable

Blue

Green Status LED (-)

Red +10 VDC Supply

Black DC Common