Instructions / Assembly

6–10”
(15.2–25.4 cm)
WWW.BIGASSFANS.COM © 2015 DELTA T LLC ALL RIGHTS RESERVED.
13
5. Secure the Safety Cable
ATTENTION
The safety cable is a crucial part of the fan and must be installed correctly. If you have any questions, call
Customer Service for assistance.
A. Route the free end of the safety cable into one of the two holes in the Gripple®, and then pull the cable
through the Gripple until the Gripple rests at the top of the extension tube.
B. Wrap the safety cable around the angle irons, leaving 6–10 in. (15.2–25.4 cm) of slack.
C. Route the loose end of the safety cable through the remaining hole in the Gripple and pull to tighten.