Instructions / Assembly

HAIKU® BY BIG ASS FANS

Remove the tie holding the wiring harnesses to the extension tube. Plug the two large wiring

harnesses (a) into the receptacles on the motor. Plug the small, male wiring harness (b) into the

female wiring harness from the motor shaft.

Align the bolt holes on the extension tube with the holes on the motor shaft, and then secure the

tube with the provided hardware and wrenches.

Mounting Hardware:

c. M8 bolt

d. M8 washer

e. M8 nylock nut

To remove slack, gently tug on the cables at the

top of the extension tube.

STEP COMPLETED