Product Info

J. Recessed Reset button
K. Configurable Power Button
L. Outlet Status LEDs
a. See LED functions for more information
M. Loop Out Outlet
a. NOTE: This outlet is NOT surge protected,
it is intended to be used with additional
PR-V7PI units.
N. 15-amp Circuit Breaker
O. IEC Power Input 120v
P. Traditional Vertical Rack Clips
a. These Clips use the groove on the back of
the PR-V7PI
Q. Vertical Rack Ear mounting locations
a. Shown are the Included Flat Rack ears
LED Indicators
“G” or
Ground
On: PDU is grounded properly
Off: PDU is not grounded
“P” or Power
Blue: Good / Protected and Clean power
Red: Bad, No Protection
“N” or
Network
Blinking Red: No Network Connection
Solid Blue: Good Network Connection
Rapid Blinking Red: PDU failure requires reboot
or reset
Outlet Status
On: Outlet is On
Off: Outlet is Off
“VOL” or
Safe Voltage
Solid Blue: Normal/Good Voltage
Solid Red: Over/Under Voltage
Loop Out
On: Outlet is On
Off: Outlet is Off
S1 Surge
Module
On: Protected / Good
Off: Not Protected