Assembly Instructions

When desired, attach the Meat Probe the PTC Controller by fi rst unplugging the rubber insert
from the Meat Probe Socket. Then insert the Meat Probe plug into the socket.
To route the Meat Probe into the grill, rotate the Port Cover and carefully insert the Meat
Probe tip into the grill. While holding the Port Cover open, pull enough wire inside the grill so
the Meat Probe will reach the food. Pull any loose wire back outside of the grill and close the
Port Cover.
When not in use, keep the Meat Probe stored indoors, out of reach from children
and pets.
To extend the life of the controller and hardware, leave the rubber insert in the
Meat Probe Socket when not in use.
NOTE:
10
MEAT PROBE CONNECTION & USE
When the Meat Probe is placed into food, you can view the temperature by pressing the
M/P button on the Controller for a few seconds. The current measured temperature will be
displayed for 3 seconds, after which the display will return to the default reading.
Only the supplied Meat Probe is compatible with this Controller. Please contact
customer service if you need a replacement.
CAUTION: