Technical Specs

EWE Module

Technical Specification

Autor: Sc / Fa

Datum: 22.09.2017

Updated: 05.02.2018

EWE Module Technical Specification 15 / 16

9 Assembly Process

1. Pre assemble the electronic lid (Display, Display contacts, sealing and battery holder)

2. Mount PCB on electronic lid with 4 silver screws

3. Place sealing and rubber mat on PCB

4. Get preassembled tool body (check sensor contacts are clean)

5. Place module in preassembled tool body

6. Mount module on tool body with 4 black screws

7. Place Battery cover on module. Cover 4 black screw heads with gray glue. Customer is not

able to open it anymore.