User`s manual

5
3. SET UP YOUR GAMMA Trolley
Step 1: Press the red button in order to pull
out the front wheel holder from the
back of bottom bracket
Step 4: Release the plastic lever on the
folding mechanism.
Step 2: Pull forward the front wheel and
turn 90 degree to make the front
wheel in correct and rolling
p
osition.
Step 3: Press the axle button and insert the axle
into the plastic hole in the end of rear
wheel. There are three grooves and one
plastic ring on the axle, groove 1 and 2
are provided for different wheel distance
option. Groove 3 is to stop the wheel
moving by axle when running out of the
battery, so that it will be easier to move
the wheel. Plastic ring is located into
the groove that is not on use.
Step 5: Hold the handle (c) and unfold
the trolley.
Step 6: Lift the handle frame tube to
the proper height, then push the
plastic lever down to lock it.
1.
2.
3.