User Manual

GENERAL SAFETY RULES

 Save these instructions.

 For your safety, read, understand, and follow the information provided with and on this product

before using.

 The owner and/or operator of this equipment shall have an understanding of safe use/operating

procedures before attempting to use.

 The owner and/or operator shall be aware that the use of this product may require special skills and

knowledge.

 Instructions and safety information shall be conveyed in the operator's native language before use of

this device is authorized.

 If any doubt exists as to the safe and proper use of this product as outlined in this factory authorized

manual, remove from service immediately.

 Inspect before each use.

 Do not use if broken, bent cracked, or damaged parts (including labels) are noted.

 If the product appears damaged in any way, operates abnormally or is missing parts, it should be

removed from service immediately and the distributor should be notified.

 If you suspect that the product was subjected to a shock load (a load suddenly dropped

unexpectedly upon it), immediately discontinue use until product has been clocked by a factory

authorized service center (contact distributor or manufacturer for list of Authorized Service Centers).

 It is recommended that an annual inspection be done by qualified personnel.

 Labels and owner's manuals are available from the distributor.

SAFETY MARKINGS

WARNING:

1. Study, understand, and follow all instructions before operating this device.

2. Wear eye protection that meets ANSI Z87.1 and OSHA standards.

3. Do not exceed the rated capacity.

4. Use a pressure gauge that indicates pounds of force applied.

5. Inspect before each use.

6. When using extension tubes, position the shortest tube farthest from the cylinder.

7. Do not subject the hose to extreme cold, heat, sharp surfaces, abrasion, or impact.

8. Do not allow the hose to kink, twist, curl, or bend so tightly that it restricts fluid flow.

9. Make sure setup is stable and secure before performing any work.

10. No alterations or modifications shall be made to this product.

11. Only components supplied with this kit shall be used with this kit.

12. Do not use this product for any use other than the manufacturer specified usage.

13. Failure to heed these markings may result in personal injury, property damage, or both.