User's Manual

02
1.b. Features:
Two playing modes: Classic or Remote
Button programming system
Handlebar calibration system
Full Wii™ controls for compatibility with Wii™ games.
Adjustable pedal resistance
Forward and reverse pedalling
Handlebar can be adjusted to four different heights
Seat can be adjusted to seven different heights
Front and rear stabilisers
Maximum weight limit: 130kg.
1.c. Cyberbike™ overview:
(Picture A)
2. ASSEMBLING THE CYBERBIKE™
The Cyberbike™ should only be assembled by an adult. When assembling the bike,
no force should be applied when inserting parts. In case of dif culty, you should refer
to the assembly diagrams or contact the helpline (see paragraph 7).
2.a. Assembling the parts
Front and rear supports: Turn the Cyberbike™ upside down and attach the feet
as described below. Position the screws and tighten using the assembly tool
provided. (Fig.1)
Seat: Insert the tube supporting the seat into the Cyberbike™ main frame.( g.2)
Handlebar: Connect the cable inside the tube before inserting the handle bar
tube into the Cyberbike™ base.
Insert the handlebar tube into the Cyberbike™ main frame as shown. ( g.3)
Insert the left handle into your handle bars making sure that the screw hole is
correctly positioned underneath. Insert the screw supplied and screw in with
the tool provided or a Phillips screwdriver. Make sure the screw is fully screwed
in before use. ( g.4)
Pedals: Each pedal is marked as left and right. It is essential that you insert the
correct pedal to each side. Tighten the pedals with the tool provided. ( g.5)
Insert the AA batteries in the battery compartment
2.b. Connecting the Cyberbike
Connecting the Cyberbike
Ensure your Wii™ console is switched off
Check that your handlebar is correctly centred.
Ensure that the Cyberbike™ slide switch is set to either the REMOTE mode (for
the Cyberbike™ game) or CLASSIC(for Mario Kart™ game).
ENGLISH DEUTSCH ESPAÑOLFRANCAIS NEDERLANDS ITALIANO PORTUGUÊS DANSK NORSK SVENSKA
FRONT BACK
Fig.1
Fig.2
Fig.4
Fig.3