User's Manual
5
SUOMI DANSK NORSK SVENSKA PORTUGUÊS ITALIANO ESPAGÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH
This product is designed for persons 7 years and over. Adult supervision is recommended
when using Cyberbike™
Adjusting pedal resistance
You can adjust the pedal resistance on your Cyberbike™ using the knob located at the
base of the handlebar tube.
• Rotate the knob in an anti-clockwise direction (towards the “-”) to decrease
resistance when pedalling. (g.8)
• Rotate the knob in a clockwise direction (towards the “+” ) to increase resistance
when pedalling. (g.8)
• Pedal resistance can also be adjusted when pedalling.
4.ADVANCED FUNCTIONS
4.a. Calibrating the handlebar
If you nd that your Cyberbike is not steering correctly, you may need
to re-calibrate it.
To do this, follow these simple steps:
• Press and hold the SELECT and CAL buttons for at least 2 seconds. The LED located
next to the CAL button will light and begin to ash.
• Release the SELECT and CAL and then centre the handlebar.
• Press the SELECT button. The LED next to the CAL button will now ash more ra-
pidly. The central position of the handlebar has now been set.
• Turn the handlebar to the left or right as far as it will go.
• Press the SELECT button. The LED next to the CAL button will continue to ash
rapidly.
• Turn the handlebar to the right as far as it will go.
• Press the SELECT button. The LED next to the CAL button will now switch off.
The handlebar calibration process is now complete.
5. TROUBLESHOOTING
The Cyberbike is not recognized by the TV.
• Ensure that the USB receiver is connected. See section 2a.
• Ensure that your batteries are installed and correctly tted. See section 2a.
• Ensure that you have switched the power switch to the ‘On’ position’.
The vehicle/character fails to move on the screen when you are pedalling
on the Cyberbike™.
• Check that all cables are properly connected inside the Cyberbike™.
See section 2a.
• Ensure that your USB receiver is connected.
The vehicle/character fails to respond when you apply the Cyberbike™ brake.
• Check that all cables are properly connected inside the Cyberbike™.
See section 2a.
The seat button does not function.
• Check that all cables are properly connected inside the Cyberbike™.
See section 2a.
• Ensure that the bike is not being sat on when it is rst powered on.
• Note that this function only works in certain sections of the game. Please take note
in the games instructions for the correct usage.
The vehicle/character turns, although the handlebars are centred.
• Reset the calibration. See section 4.
The Cyberbike is losing its connection signal during use.
• Ensure the battery power is not too low. If batteries are low, please replace.
• Check to see if the receiver signal is being obscured by the TV. Try using
the USB extension cable. See section 2a.
6.WARNING
01. Read the enclosed instructions carefully before using the product. The product should
only be used as described in these instructions. Keep these instructions in a safe place.
02. This equipment complies with European standards governing tness equipment for
non therapeutic, home use.
03. This equipment should be assembled by an adult. Care should always be taken when
assembling and disassembling the Cyberbike™.
04. All small parts and plastic bags should be kept out of reach of children. Ensure that
plastic bags are disposed of appropriately.
05. The equipment owner must ensure that anyone using this product has been informed
of all safety measures. Children should be given adequate instructions by an adult
on how to use the equipment. Children should always use the equipment under adult
supervision.
06. Help your child to adjust the seat to the correct height.
07. Delta Reference / Bigben Interactive accept no responsibility for any injury or damage
inicted on any person or any property as a result of improper use of the product by
the purchaser or a third party.
08. Not suitable for children or adults weighing more than 130kg/286lbs.
09. This product is designed for home use only. This product should not be used for any
public, commercial or rental purposes.
10. This product should be used and stored indoors, in a dry, dust-free place, on a rm,
at surface with ample room for manoeuvre. Ensure that you have adequate room to
access and move around your Cyberbike™ safely. If necessary, a mat can be placed
underneath the Cyberbike™ to protect the oor. Keep all liquids well away from the
equipment to avoid the risk of re or electrocution.
11. The user is responsible for maintaining the Cyberbike™ in good condition. After
assembly and before each use, check that all parts and xings are properly secure
with no protruding elements. You should regularly check parts and xings for signs of
wear.