Operation Manual
2
MULTIHS10 gaming headset for XBOX360™ PS3™ and PC
Introduction
Thank you for purchasing the MULTIHS10 gaming headset for XBOX360™, PS3™ and PC by Bigben
Interactive. This product has been designed to enhance the audio experience of your console. Please follow
the instructions carefully to ensure your product is set up correctly.
Contents
• MULTIHS10 headset
• Stereo RCA adaptor extension cable
• Controller chat cable (For XBOX360™ only)
• User manual
Use
Connecting directly to your PS3™ console.
1. If you are using the original composite cable supplied with your PS3™ console (ending with the 3 yellow,
red and white connection plugs) simply unplug the red and white connections and plug them into the round
sockets on the RCA extension cable.
2. Then plug the RCA extension cable back into the TV in the exact same sockets you removed them from.
3. Plug the green coloured 3.5mm plug from your headset into the green coloured female 3.5mm socket on
your extension cable.
4. Connect the USB cable to any spare USB socket on your console.
5. Set the selection switch on the remote to PS mode and ensure the Mic is set to the On position.
6. You now need to congure the audio and chat settings on your console. Go to the PS3™ Audio and chat
settings section.