Operation Manual

5
Adjust the volume control on the remote to your desired level and ensure that the Mic control is still switched to
the on position. If you do not want players to hear you, slide the Mic position to off.
Adjust the chat level volume control to your desired level so you can clearly hear other players online.
Installing the headset on XBOX360™
Before you start connecting cables you should adjust some settings within your XBOX360™ console to ensure
the correct audio signals are being sent. To do this, follow these steps:
1. Press the XBOX guide button in the centre of your controller to open the Dashboard.
2. Navigate to the right to the Settings area and scroll down to “Preferences” from the menu. Then press the
“A” button.
3. On the Preferences screen, select the “Voice” option and Press “A”.
4. Select the “Play Through Headset” option and then set the Volume to 10.
You are now ready to start setting up your cables.
Connecting directly to your XBOX360™ console.
1. If you are using the original composite cable supplied with your XBOX360™ console (ending with the 3
yellow, red and white connection plugs) simply unplug the red and white connections and plug them into the
round sockets on the RCA extension cable.
2. Then plug the RCA extension cable back into the TV in the exact same sockets you removed them from.
3. Plug the green coloured 3.5mm plug from your headset into the green coloured female 3.5mm socket on
your extension cable.
4. Plug the USB cable into a spare USB socket on the front or rear of your console.