ENGLISH Thank you for purchasing the Bigben Interactive Quickfire 2 controller. This product has been designed to enhance your console. Please keep this instruction manual for future reference. If you require any assistance or help please contact the Helpline.
ENGLISH Using the Controller with a PS3™ Slide the switch on the Receiver Unit to PS3™ mode. 01. Switch on the controller by sliding the power On/Off switch on the controller to on. The LCD screen will then Illuminate. 02. Press the `PS Home’ button on the centre of the controller. This is the button with the house symbol. 03. The controller will connect to your PlayStation®3 console and your player number will be indicated in the top left of the LCD screen. 04.
ENGLISH Using the settings on your controller. Your Quickfire 2 controller has been designed so it can be easily set up using the LCD screen. The modes can be activated, deactivated and customised using the simple icon system. FRANÇAIS Firstly, give a short press on the Home button to enter the settings screen. Use the left controller stick to move between the different icons. The selected icon will have a white frame around it to indicate it is currently selected.
Quickfire* 5 PORTUGUÊS ITALIANO The Quickfire 2 controller has 6 different Quickfire modes to suit all of your favourite shooting games. The controller is set to Mode 1 which is 8 shots per second by default. The mode is displayed on the LCD screen as M1 08SPS. Quick fire is set to the R1 button of your controller as this is the most common firing button for shooting games. Rapid fire is switched on by default. The Icon is highlighted as green to indicate that it is active.
ENGLISH Changing the quickfire modes The quickfire modes have been designed to work on all of your shooting games. To ensure full compatibility please select the correct mode for your game.
Programming other buttons for Quickfire mode By default, only the R1 button is used for Quickfire, but if you are playing games that use another button for firing, you can also program. ENGLISH FRANÇAIS ESPAÑOL NEDERLANDS 01. Short press the Home button to enter the settings page mode. 02. Select the Rapid fire icon and press the start button. 03. Use the left stick to move to the M1 position in the settings screen. 04. Move the left stick up or down to the M6 position. 05.
ENGLISH 06. Press select to confirm your selection. The screen will then return to the home page. 07. Your button selections will now have rapid fire all at the same firing rate. FRANÇAIS DEUTSCH Disable Quickfire on R1 button NEDERLANDS To disable rapid fire on the R1 button, follow the same instructions as noted above and press the R1 button to deselect it. The R1 button will then disappear from the bottom of the screen.
ENGLISH 03. Hold again to switch it back Off. 04. Controller emits a beep to indicate that Quickfire is off. 05. The Rapid fire icon will also change colour to show that it is on or off. The Sniper mode allows you to adjust the sensitivity and dead band of the right stick for better aiming. This mode is programmable to let you find the best setting. NEDERLANDS DEUTSCH Sensitivity can be adjusted from 20% to 100% in 5% increments. Dead band cancellation can be adjusted from 0 to 30% in 2% increments.
ENGLISH FRANÇAIS 05. Move the left stick right to the ‘T’ position to adjust the deadzone threshold. 06. Move the left stick up or down to increase or decrease the amount of deadzone you want on the stick. A lower deadzone will mean that the stick will move at the slightest touch. A higher deadzone will mean that you will need to move the stick more before it will activate. 07. Press select to confirm your selection and return to the menu screen.
ENGLISH FRANÇAIS If your game uses different buttons other than R1 to shoot and O to crouch you will need to edit the sequence. To do this, follow these steps: ESPAÑOL NEDERLANDS 01. Short press the Home button to enter the settings page mode. 02. Select the Duck and Fire icon and press the start button. 03. Use the left stick to move to the Edit position and press start. DEUTSCH Editing D&F mode 04. Enter the correct buttons for shoot and duck in the spaces provided. 05.
ENGLISH FRANÇAIS Additional editing options DEUTSCH The editing feature can be used on the D&F, Auto Aim, Auto Reload and Combo modes. It also has 3 additional options that can be used. NEDERLANDS 01. When starting the editor, if you move the left stick to the left one step, you will find the ‘Timing option.’ This allows you to edit the gap timing between each step. To use this simply go to the ‘TR’ option, press start and then push up or down on the left stick to change the timing.
ENGLISH DEUTSCH FRANÇAIS D&F mode toggle on \ off : The D&F mode can be switched on and off on during play using the buttons on the underside the controller. ESPAÑOL NEDERLANDS 03. If you move the left stick to the left 3 steps you will find the default settings option. This will reset the chosen sequence back to the factory default. To use simply go to the ‘DF’ option, press start and factory setting will be reset.
ENGLISH To switch it on enter the settings screen, select the Auto aim mode and select Y. The Auto aim mode icon will then appear green. FRANÇAIS DEUTSCH Set aim \ iron sights button The button for aim \ Iron sights can be edited. To set aim \ iron sights button, follow these steps: NEDERLANDS 01. Short press the Home button to enter the settings page mode. 02. Select the auto aim icon and press the start button. 03. Use the left stick to move to the aim position button. It will display L1 as default.
ENGLISH IMPORTANT ! As noted above, this function will not with all games, so even editing the sequence may not resolve it. To edit the sequence, follow these steps: ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS 01. Short press the Home button to enter the settings page mode. 02. Select the auto aim icon and press the start button. 03. Use the left stick to move to the Edit position and press start. 04. Move the left stick up or down to adjust the ON timing. 05.
ENGLISH 04. Controller emits a beep to indicate that auto aim is off. 05. The auto aim icon will also change colour to show that it is on or off. Swap L\R BUTTONS* FRANÇAIS This feature allows the R1 or L1 buttons to be mapped to the R2 and L2 buttons and vice versa. This is useful for those players that prefer to use the lower shoulder buttons for shooting. This option can only be activated/desactivated in the menu. By default, this feature is off.
ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO 01. Short press the Home button to enter the settings page mode. 02. Move down with the left stick to show the bottom row of icons and select the combo icon and press the start button. 03. Select the P1 or P2 option. And press start. P1 represents the left combo button and P2 represents the right combo button. 04. Press the first action button for your sequence. Then push right on the left stick to move to the next button position.
ENGLISH IMPORTANT: When swapping between your Set 1 and Set 2 selections you will also need to reselect the P1 and P2 settings if you intend to use the 2 different combo settings. To do this, simply go to the combo icon and press start to check your combo sequences are loaded. Check both the P1 and P2 settings by pressing start on each one. This will then ensure the correct sequences are loaded.
If your game uses different buttons other than square to reload and triangle to change weapon, you will need to edit the sequence. To do this, follow these steps: ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS 01. Short press the Home button to enter the settings page mode. 02. Select the Auto reload icon and press the start button. 03. Use the left stick to move to the Edit position and press start. 04. Enter the correct buttons for reload and weapon swap in the spaces provided. 05.
ENGLISH To enter the Tool Box follow these steps FRANÇAIS 01. Short press the Home button to enter the settings page mode. 02. Move down with the left stick to go down to the lower row of options. 03. Select the toolbox icon in the bottom right corner of the screen and press the select button. 04. You can then select one of the 3 options.
The Action buttons, sticks and D-pad are all illuminated. This option can be switched on and off in the menu to preserve battery life. The lights can also be set to flash on and off when a vibration signal is sensed. By default the option is set ON. To change the LED function follow these steps: 21 ENGLISH FRANÇAIS PORTUGUÊS ITALIANO 01. Enter the toolbox as noted above and the select the LED icon. 02. To switch the illumination off, select the unlit light bulb icon on the left side. 03.
ENGLISH FRANÇAIS DEUTSCH NEDERLANDS Reset to factory settings This option allows to reset all settings of the controller. To reset settings, follow these steps: ESPAÑOL 01. Enter the toolbox as noted above and select the Reset icon on the screen. 02. The ‘N’ option is selected as default to prevent accidental reset. 03. Use the left stick to choose ‘Y’ option and press start 04. All modes will now be reset to default factory settings. 05. Press SELECT button to exit the menu.
ENGLISH TROUBLESHOOTING Controller is not working. FRANÇAIS • Ensure that the power button is the ‘On’ position. • Check that the batteries are not low. If so, replace the batteries. If power is low the battery indicator on the screen will appear red to indicate that the batteries need replacing. • Ensure that the receiver is connected to the console and press the home button on the controller to connect. • Check that the switch on the receiver is set to PS3™ mode.
ENGLISH Combos are not working correctly with my games. • Ensure you have entered the correct sequence with the correct timing gaps. DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT FRANÇAIS DEUTSCH This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
ENGLISH TECHNICAL HELPLINE INFORMATION The Technical Helpline is a live one-to-one service UK: 0905 710 0015 Hours: 10:00am till 5:00pm, Monday to Friday FRANÇAIS (All calls are charged at 30 pence per minute. All callers must be over 16 years of age. Permission must be obtained from the person paying the bill. Parental supervision is recommended).
www.bigben.