Operation Manual

- EN 6 -
6.2. Returning to a preset station
•
P02, etc. to P20. The display will then show the station number (P01, P02, etc. to P20) and the FM
frequency 3 seconds after the station is selected.
6.3. Scanning
•
• The radio will automatically scan the frequency and save the preset station to memory, with a total of
to preset station no. P01. The display will show the current time and FM frequency.
When the SCAN function is activated, the newly found stations will replace the preset stations
that have been previously stored in the memory.
7. Volume control
•
•
8. Sleep mode timer
•
•
30, 15, 10, 05 & OFF. To turn off the sleep mode timer, select OFF.
9. Replace clock back-up batteries
• Insert 2 AAA batteries. Check the polarity (+ and – at ends of the battery) and follow the instructions
on the diagram near the battery compartment. Close the compartment door.
10.
0.5W
2 X AAA UM4 (R6)