Operation Manual
2
XBHS01 gaming headset for use with XBOX360™
Introduction
Thank you for purchasing the XBHS01 gaming headset, for use with XBOX360™, by Bigben Interactive. This
product has been designed to enhance the audio experience of your console. Please follow the instructions
carefully to ensure your product is set up correctly.
Contents
• XBHS01 headset
• Stereo RCA adaptor extension cable
• User manual
Use
Installing the headset
Before you start connecting cables you should adjust some settings within your XBOX360™ console to ensure
the correct audio signals are being sent. To do this, follow these steps:
1. Press the XBOX guide button in the centre of your controller to open the Dashboard.
2. Navigate to the right to the Settings area and scroll down to “Preferences” from the menu. Then press the
“A” button.
3. On the Preferences screen, select the “Voice” option and Press “A”.
4. Select the “Play Through Both” option and then set the Volume to 10.
You are now ready to start setting up your cables.
Connecting to your TV or amplier headphone jack
1. If you are connecting to your TV or amp headphone jack, connection is easy. Simply plug the green
coloured 3.5mm audio plug from your headset into the TV or amplier input jack socket. The volume output
is then controlled by the TV or amplier controls. Set this to the normal levels you listen to the TV at.
2. Plug the grey coloured 2.5mm jack on the end of the shorter cable into the headset socket on the front
of your controller. This will work with any cabling system you are using from your console to your TV set,
including HDMI.
3. Now adjust the volume control on the remote to your desired level and ensure that the Mic control is
switched to the on position. If you do not want players to hear you, slide the Mic position to off.