Operation Manual

4
Connecting your headset if you are using an HDMI cable
If you are using an HDMI cable on your console and you do not have RCA audio outputs on your TV you will
need to purchase an XBOX360™ audio adaptor. This then allows you to take your sound from the console
even when you are using HDMI. These adaptors * can be purchased from online retailers.
1. To use the adaptor, rstly connect the main plug to the AV socket on the rear of your XBOX360™ console. It
is situated next to the HDMI output.
2. Then plug the RCA extension cable back into audio adaptor, using the red and white plugs.
3. Plug the green coloured 3.5mm plug from your headset into the green coloured female 3.5mm socket on
your extension cable.
4. Plug the grey coloured 2.5mm jack on the end of the shorter cable into the headset socket on the front of
your controller.
5. Now adjust the volume control on the remote to your desired level and ensure that the Mic control is
switched to the on position. If you do not want players to hear you, slide the Mic position to off.
If you do have RCA outputs on the rear of your TV, attach the RCA extension cable to the red and white
connectors on the TV and then follow points 3 to 7 as listed above.