User's Guide
Table Of Contents
- 1 Tips for Reading and Understanding this User Guide
- 2 Before you Begin Using Bigfoot Unity
- 3 Indications and Safety Information
- 4 Bigfoot Unity Welcome Kit
- 5 First Time Setup of Bigfoot Unity
- 6 Using Bigfoot Unity Caps
- 6.1 Pairing the Black and White Caps
- 6.2 Using the Black and White Caps
- Viewing Time Since Last Long-Acting Dose on the Black Cap
- Viewing Long-Acting Dose Amount on the Black Cap
- Viewing Time Since Last Rapid-Acting Dose on the White Cap
- Using your White Cap to View Current Glucose
- Viewing Correction Dose Amount on the White Cap
- Viewing Meal Dose Amounts on the White Cap
- Viewing Meal + Correction Dose Amounts on the White Cap
- 6.3 Using your Caps when Replacing Insulin Pens
- 6.4 Making Diabetes Treatment Decisions
- 6.5 Charging your Caps
- 7 Using the Sensor
- 8 Daily Use and Additional Features
- 9 Care, Maintenance and Disposal of Bigfoot Unity
- 10 Troubleshooting
- Appendix A: Receiving and Responding to Notifications/Alerts on your App/phone
- Appendix B: Settings for Bigfoot Unity App
- Appendix C: Technical Information
- C.1 Labeling Symbols
- C.2 Sensor Specifications
- C.3 Cap Specifications
- C.4 Communications Specifications
- C.5 Bigfoot Unity™ Diabetes Management System Specifications
- C.6 Kit Specifications
- C.7 Security Measures
- C.8 Quality of Service (QoS)
- C.9 Meter Specifications
- C.10 Performance Characteristics of the FreeStyle Libre 2 Flash Glucose Monitoring System*
- C.11 Electromagnetic compatibility (EMC)
- C.12 Warranty
- Index
106
The Bigfoot Unity
™
Diabetes Management System User Guide | Chapter 8
2. You will be prompted to have your new
White Cap ready. Tap Yes, I have my new
Cap to continue.
• If you don’t have your new White Cap,
tap Cancel and then contact Bigfoot
Customer Care at (551) 244-3668.
3. You will be prompted to have your Meter
ready. Tap Conrm to continue.
• If you don’t have your new Meter and
White Cap ready, tap Cancel. Repeat
the steps for starting/pairing your new
White Cap when it is ready.
4. Repeat steps for starting/pairing a White Cap, Meter and Sensor in
Chapter 5.
You can tap < Back to return to the White Cap device screen if you
do not want to proceed.
White Cap (Status and Start a New White Cap)
Shows the last time the App communicated
with your White Cap.
1. Tap Start New White Cap to start a new
White Cap.
• When you start a new White Cap, you
will also need to start a new Sensor and
start/pair your Meter.
CAUTION: When you get a new Cap, always pair it using the
Bigfoot Unity App on your phone. The pairing process sends your
most recent insulin settings to the new Cap. If you do not pair your
new Cap, you will not be able to use it.
You’ll need to pair the new
Cap to your Meter before
you can begin use.
Confirm You Have
the Meter
Cancel
Confirm
If you don't have one, contact
Bigfoot Customer Care at
Do You Have Your New Cap?
Cancel
Yes, I have my new Cap
(551) 244-3668.