User's Guide
Table Of Contents
- 1 Tips for Reading and Understanding this User Guide
- 2 Before you Begin Using Bigfoot Unity
- 3 Indications and Safety Information
- 4 Bigfoot Unity Welcome Kit
- 5 First Time Setup of Bigfoot Unity
- 6 Using Bigfoot Unity Caps
- 6.1 Pairing the Black and White Caps
- 6.2 Using the Black and White Caps
- Viewing Time Since Last Long-Acting Dose on the Black Cap
- Viewing Long-Acting Dose Amount on the Black Cap
- Viewing Time Since Last Rapid-Acting Dose on the White Cap
- Using your White Cap to View Current Glucose
- Viewing Correction Dose Amount on the White Cap
- Viewing Meal Dose Amounts on the White Cap
- Viewing Meal + Correction Dose Amounts on the White Cap
- 6.3 Using your Caps when Replacing Insulin Pens
- 6.4 Making Diabetes Treatment Decisions
- 6.5 Charging your Caps
- 7 Using the Sensor
- 8 Daily Use and Additional Features
- 9 Care, Maintenance and Disposal of Bigfoot Unity
- 10 Troubleshooting
- Appendix A: Receiving and Responding to Notifications/Alerts on your App/phone
- Appendix B: Settings for Bigfoot Unity App
- Appendix C: Technical Information
- C.1 Labeling Symbols
- C.2 Sensor Specifications
- C.3 Cap Specifications
- C.4 Communications Specifications
- C.5 Bigfoot Unity™ Diabetes Management System Specifications
- C.6 Kit Specifications
- C.7 Security Measures
- C.8 Quality of Service (QoS)
- C.9 Meter Specifications
- C.10 Performance Characteristics of the FreeStyle Libre 2 Flash Glucose Monitoring System*
- C.11 Electromagnetic compatibility (EMC)
- C.12 Warranty
- Index
140
The Bigfoot Unity
™
Diabetes Management System User Guide | Chapter 10
Problem What it may mean
Your Meter is below its operating
temperature range of 50°F to 104°F (10°C
to 40°C).
What to do
See the instructions that came with your Meter. Try moving to an
area with an ambient temperature of 50°F to 104°F (10°C to 40°C).
Wait for your Meter and test strips to reach the new temperature
(usually 10-20 minutes) before using your Meter or checking your
blood glucose.
Problem What it may mean
Your Meter is above its operating
temperature range of 50°F to 104°F (10°C
to 40°C).
What to do
See the instructions that came with your Meter. Try moving to an
area with an ambient temperature of 50°F to 104°F (10°C to 40°C).
Wait for your Meter and test strips to reach the new temperature
(usually 10-20 minutes) before using your Meter or checking your
blood glucose.
Problem What it may mean
My Meter glucose
result did not appear
on my White Cap.
You checked your blood glucose with your
Meter but the result is not being displayed
on your White Cap.
What to do
Only blood glucose tests taken within the last 10 minutes will be
displayed on the Cap. If it has been longer than 10 minutes, take
another blood glucose reading. Make sure the Meter and Cap are
turned on and within range of each other. If Meter results still do not
appear on the White Cap, use the App to re-pair the Meter to the
Cap. Within the App go to “MY DEVICES”, select “Meter” and tap
Start New Meter as described in this User Guide.