User's Guide
Table Of Contents
- 1 Tips for Reading and Understanding this User Guide
- 2 Before you Begin Using Bigfoot Unity
- 3 Indications and Safety Information
- 4 Bigfoot Unity Welcome Kit
- 5 First Time Setup of Bigfoot Unity
- 6 Using Bigfoot Unity Caps
- 6.1 Pairing the Black and White Caps
- 6.2 Using the Black and White Caps
- Viewing Time Since Last Long-Acting Dose on the Black Cap
- Viewing Long-Acting Dose Amount on the Black Cap
- Viewing Time Since Last Rapid-Acting Dose on the White Cap
- Using your White Cap to View Current Glucose
- Viewing Correction Dose Amount on the White Cap
- Viewing Meal Dose Amounts on the White Cap
- Viewing Meal + Correction Dose Amounts on the White Cap
- 6.3 Using your Caps when Replacing Insulin Pens
- 6.4 Making Diabetes Treatment Decisions
- 6.5 Charging your Caps
- 7 Using the Sensor
- 8 Daily Use and Additional Features
- 9 Care, Maintenance and Disposal of Bigfoot Unity
- 10 Troubleshooting
- Appendix A: Receiving and Responding to Notifications/Alerts on your App/phone
- Appendix B: Settings for Bigfoot Unity App
- Appendix C: Technical Information
- C.1 Labeling Symbols
- C.2 Sensor Specifications
- C.3 Cap Specifications
- C.4 Communications Specifications
- C.5 Bigfoot Unity™ Diabetes Management System Specifications
- C.6 Kit Specifications
- C.7 Security Measures
- C.8 Quality of Service (QoS)
- C.9 Meter Specifications
- C.10 Performance Characteristics of the FreeStyle Libre 2 Flash Glucose Monitoring System*
- C.11 Electromagnetic compatibility (EMC)
- C.12 Warranty
- Index
158
The Bigfoot Unity
™
Diabetes Management System User Guide | Appendix C
C.2 Sensor Specifications
Sensor glucose
assay method
Amperometric electrochemical sensor
Sensor glucose
reading range
40 to 400 mg/dL
Sensor size
0.19 in height and 1.38 in diameter (5 mm in
height and 35 mm diameter)
Sensor weight 0.18 oz (5 grams)
Sensor power
source
One silver oxide battery
Sensor data Up to 14 days
Sensor memory
8 hours (glucose readings stored every 15
minutes)
Sensor
transmission range
20 feet (six meters) unobstructed
Operating
temperature
50 °F to 113 °F (10.0 °C to 45.0 °C)
Sensor Applicator
and Sensor
Pack storage
temperature
36 °F to 82 °F (2.2 °C to 27.8 °C)
Operating and
storage relative
humidity
10-90%, non-condensing
Sensor water
resistance
IP27: Can withstand immersion into three ft
(one meter) of water for up to 30 minutes.
Protected against insertion of objects
> 12 mm diameter
Operating and
storage altitude
-1,250 ft (-381 meters) to 10,000 ft (3,048
meters)
Radio Frequency
2.402 to 2.480 GHz BLE; GFSK; 0dBm
EIRP