User's Guide
Table Of Contents
- 1 Tips for Reading and Understanding this User Guide
- 2 Before you Begin Using Bigfoot Unity
- 3 Indications and Safety Information
- 4 Bigfoot Unity Welcome Kit
- 5 First Time Setup of Bigfoot Unity
- 6 Using Bigfoot Unity Caps
- 6.1 Pairing the Black and White Caps
- 6.2 Using the Black and White Caps
- Viewing Time Since Last Long-Acting Dose on the Black Cap
- Viewing Long-Acting Dose Amount on the Black Cap
- Viewing Time Since Last Rapid-Acting Dose on the White Cap
- Using your White Cap to View Current Glucose
- Viewing Correction Dose Amount on the White Cap
- Viewing Meal Dose Amounts on the White Cap
- Viewing Meal + Correction Dose Amounts on the White Cap
- 6.3 Using your Caps when Replacing Insulin Pens
- 6.4 Making Diabetes Treatment Decisions
- 6.5 Charging your Caps
- 7 Using the Sensor
- 8 Daily Use and Additional Features
- 9 Care, Maintenance and Disposal of Bigfoot Unity
- 10 Troubleshooting
- Appendix A: Receiving and Responding to Notifications/Alerts on your App/phone
- Appendix B: Settings for Bigfoot Unity App
- Appendix C: Technical Information
- C.1 Labeling Symbols
- C.2 Sensor Specifications
- C.3 Cap Specifications
- C.4 Communications Specifications
- C.5 Bigfoot Unity™ Diabetes Management System Specifications
- C.6 Kit Specifications
- C.7 Security Measures
- C.8 Quality of Service (QoS)
- C.9 Meter Specifications
- C.10 Performance Characteristics of the FreeStyle Libre 2 Flash Glucose Monitoring System*
- C.11 Electromagnetic compatibility (EMC)
- C.12 Warranty
- Index
59
The Bigfoot Unity
™
Diabetes Management System User Guide | Chapter 5
• Wait for the App to conrm that the
Sensor was started. A check mark
( ) will indicate that the Sensor was
successfully started. Tap OK.
Note: If there is a problem with starting
your Sensor, you will be prompted to try
starting the same Sensor again or using
a new, replacement Sensor. Tap OK. See
Chapter 10 - Troubleshooting for more
information on problems with starting and
scanning your Sensor and recommended
next steps.
8. Decide if you want a series of informational
screens about how to scan your Sensor
with your White Cap.
• Tap How to scan the Sensor if
you want the informational screens
displayed.
9. Touch the screen of the White Cap to the
Sensor as shown, until you hear the Cap
beep and feel it vibrate.
• Read Important message that taking
more than 500 mg of Vitamin C
supplements per day can falsely raise
Sensor readings, and then tap
I Understand to continue.