Use and Care Manual

13
Using Your Manual Lock For the First Time
 All manual locks come from the factory with the dial locked in place by
the Day-Lock. Open your safe by rotang the hub or hand wheel
clockwise and pulling the door open. There is an envelope inside your
safe with a set of keys. Unlock the Day-Lock by inserng the key and
rotang clockwise. Now the dial is operaonal (using the dial is easier
with the Day-Lock key removed).
 With the door to the safe open, extend the door bolts by turning the
handle counter-clockwise.
 The combinaon to your manual lock can be found on the envelope that
contained your Owner’s Manual and Day-Lock keys.
Operang the Dial On Your Manual Lock
Always align each number (2 digits per number) of your combinaon to the
“opening index” at the 12 o’clock posion at the top of the ring around the
dial.
 Rotate the dial counter-clockwise at least 4 full
revoluons. Stop at exactly the rst number of your
combinaon.
 Turn the dial clockwise, passing the second number of
your combinaon twice. Stop at exactly the second
number on the third revoluon.
Sargent and Greenleaf Manual Lock Instrucons
4X
3X
Moving Your New Safe
2
 Safes can be very heavy, always use cauon when moving your safe to
prevent damage to ooring, doorways and walls.
 Check to make sure that the route to the nal locaon for your safe is
capable of supporng the weight of your safe. Also make sure the oor
beneath the nal locaon for your safe is level and can withstand the
weight of your safe plus the weight of what you plan to store in it. Shims
can help keep your safe level and operang smooth.
 Using a professional moving company is highly recommended to move
your safe and remove the shipping feet.
Opening Your New Safe
 Bighorn and Kodiak safes are shipped unlocked.
Simply rotate the hub on the front of the safe clock-
wise.
 Rhino safes with a LaGard electronic lock can be
opened by entering 1-2-3-4-5-6 on the keypad and
rotang the hub or hand wheel clockwise within 4
seconds.
 Rhino safes with a Sargent and Greenleaf (S&G)
electronic lock will open by entering 1-2-3-4-5-6 on
the keypad and then rotang the outer ring of the
keypad clockwise within 6 seconds unl it stops.
Then rotate the hub or hand wheel clockwise.
 Rhino safes with manual locks will open by simply
rotang the hub or hand wheel clockwise.
LaGard Lock
S&G Lock
Owner’s Manual and Accessory Sheet, handles (excludes models with hand
wheel), shelves, shelf clips, keys for Day-Lock (excludes models with elec-
tronic lock), power cord (if applicable).
What’s Inside