User manual

Fixed Wireless/Wired IP Camera

Appendix F. Third party and embedded web page

integration

For third party and embedded web page integration, IP Cam/w support the

standard RTSP protocol and video/audio codecs needed by most generally used

video play software, including Apple QuickTime and VideoLAN. The supported media

protocols including TCP and UDP. IP Cam/w will automatically use TCP or UDP media

stream depends on the connection request. The video codec supported is MPEG4, the

audio codecs supported are AMR-NB and MPEG2-audio.

The access methods are as follows :

rtsp://ip_cam_address/CAM_ID.password.mp2

for MPEG4 video + MPEG2 audio

rtsp://ip_cam_address/CAM_ID.password

for MPEG4 video + AMR-NB audio

Where the ip_cam_address is the IP address of the IP camera. CAM_ID is the

unique Camera ID of the specific IP camera. Password is the video play password of the

specific IP camera(detailed in section 3.6). Users can modify the password of the IP

camera to prevent others to see the video.

For embedded web page integration, add the following codes into the proper

position of the desired web page :

id="mpeg4ax"

codebase="http://www.starvedia.com/ActiveX/axmpeg4.cab#Version=0,0,0,0"

width="320" height="240">

<param name="Src" value="

rtsp://ip_cam_address/CAM_ID.password.mp2

</object>