Instructions / Assembly

ASSEMBLY INSTRUCTIONS

PACKAGE INCLUDES:

ITEM 1: FORK (1) ITEM 5: WALL TUBE (1)

ITEM 2: LEGS (2) -2a & 2b ITEM 6: QUICK-RELEASE PINS (2)

ITEM 3: LOWER TUBE (1) ITEM 7: HANGER RODS (2)

ITEM 4: HUBS (2)

NOTE: HUBS AND LEGS ARE PACKAGED TOGETHER FOR SPACE SAVINGS.

PAGE 1
ASSEMBLY INSTRUCTIONS ITEM 1: ITEM 2: ITEM 3: ITEM 4: FORK (1) LEGS (2) -2a & 2b LOWER TUBE (1) HUBS (2) PACKAGE INCLUDES: ITEM 5: WALL TUBE (1) ITEM 6: QUICK-RELEASE PINS (2) ITEM 7: HANGER RODS (2) NOTE: HUBS AND LEGS ARE PACKAGED TOGETHER FOR SPACE SAVINGS.
PAGE 2
REMOVE ALL PACKAGING AND SLIDE HUBS FROM LEG PARTS BEFORE ASSEMBLY FOLLOW THESE STEPS 1. HUB ASSEMBLY: Insert hanger rod (ITEM 7) into desired position within the hub and slide rear hub cover to close. See Figure A for details. REPEAT for second hub assembly. HUB ASSEMBLY FIGURE A: HUB ASSEMBLY ITEM 4 ITEM 7 2. Insert legs (ITEM 2 --2a & 2b) into fork (ITEM 1). 3. Insert lower tube (ITEM 3) into ITEM 1. 4. Slide first HUB ASSEMBLY over ITEM 3 and secure using quick-release pin (ITEM 6). 5.