User Manual

25
4 CYLINDER REPLACEMENT
If repair or replacement of a boom lift or outrigger hydraulic cylinder or its
component parts becomes necessary, observe the following procedures in
accordance with the safety precautions established in Section 1 of this manual.
Removing the hydraulic cylinder from the boom lift may require the use of
specialized tools and lifting equipment. NEVER attempt to operate overhead
hoists or cranes or related equipment without proper training, authorization and
supervision. Perform all maintenance procedures only in an area that is well-lit
and well-ventilated. Bil-Jax, Inc. is not responsible for personal injury or property
damage resulting from the improper use of equipment or failure to follow all
procedures and related safety precautions.
Direct all questions regarding cylinder removal and replacement to your regional
Bil-Jax representative or to the Bil-Jax Service Department at 800-537-0540.