Full Product Manual

10
Contact us by phone: [phone] or email: [e-mail]
Window Wells
Window Well Dome Cover Option
Limits the accumulation of snow, leaves and debris. Constructed of
polycarbonate, this high impact cover is UV-resistant and designed
for durability and long life.
Note: For applications with a casement window, the well must be
installed so that it is above the top of the window for a dome cover
to be utilized.
ScapeWEL Dome Cover StakWEL Dome Cover
Building Line
Window well side panels must
extend 4” above grade level.
Grade must be sloped away
from well. Downspouts must also
be directed away from the well.
Use ¾” clean
free-draining
rock or A6 stone
at least 12” in
width around
all sides of the
well. Fill to depth
of foundation
footing.
*Wells can be installed lower than
the recommended 3 ½” to help meet
grade conditions.
Tie rock ll into perimeter
drain if available.
Window
B
Dimension A
Measure from
bottom of window
sill to grade level.
*3 ½”
44” Maximum
from oor to window
sill to met egress
code requirements.
Window
Well
System
B
Distance from the outside of the foundation wall to the inside face of the rst step:
ScapeWEL = 30” StakWEL = 33¼” (37 ¼” to the inside wall)
Selecting the Proper Size
Step 1:
Measure or calculate dimension A as shown in the detail
on the right based on the site’s grade conditions and
foundation height.
Step 2:
Determine the required window well side panel height by
performing this simple calculation:
Required Side Panel Height = Dimension A + 7 ½”
From the table below, select the closest height that
will meet the site conditions.
Step 3:
Once the side panel height has been determined, read
across and select the desired window width. With the
window size selected, read across to select the proper
window well and cover.
Note: Both StakWEL
®
and ScapeWEL
®
models
satisfy building code requirements for emergency egress.
Standard Sizes and Model Numbers
X - Not Available.
*Extensions are only available for 3-tier window well models. Note: The distance from the outside of
the foundation wall to the inside face of the first step is 30”.
ScapeWEL® Window Well System
Model
No.
No. of
Tiers
(steps)
Inside
Width
Projection
from
Foundation
Side Panel Height
Maximum
Window Width
Optional
Dome
Cover
Standard
With Extension*
Height
Model
No.
Wall
Mount
Buck
Mount
4048-42 2 42” 41” 48” X X 42” 38” 4042C
4048-54 2 54” 41” 48” X X 54” 50” 4054C
4048-66 2 66” 41” 48” X X 66” 62” 4066C
4862-42 3 42” 49” 62” 81” 3019-42 42” 38” 4842C
4862-54 3 54” 49” 62” 81” 3019-54 54” 50” 4854C
4862-66 3 66” 49” 62” 81” 3019-66 66” 62” 4866C
StakWEL® Modular Window Well System
Model
No.
Height
Based
on No. of
Modules
Inside
Width
Keyhole
Centers
Projection
from
Foundation
Optional
Dome
Cover
stkwl (1) = 21” 54”
58”
40 ¼”
stkwl-c
stkwl
(2) = 36
3
⁄8”
54”
58”
40 ¼”
stkwl-c
stkwl (3) = 51¾” 54”
58”
40 ¼”
stkwl-c
stkwl (4) = 67
1
⁄8” 54”
58”
40 ¼”
stkwl-c
stkwl
(5) = 82
½”
54”
58”
40 ¼”
stkwl-c
stkwl
(6) = 97
7
⁄8”
54”
58”
40¼” stkwl-c
Note: StakWEL Window Wells cannot be used with 60” wide windows.
Use ScapeWEL model for this window size.