Dimensions Guide

STEP 1:
Measure and calculate dimension A
as shown in the detail on the right
based on the site's grade conditions
and foundation height.
STEP 2:
Determine the required window well
side panel height by performing this
simple calculation:
Required Side
Panel Height =
From the first column in the table
below, select the closest side panel
height that will meet the site
conditions.
STEP 3:
Once the side panel height has been
determined, read across and select
desired window width. With the
window size selected, read across
to select the proper window well
and cover.
Note: Both ScapeWEL and StakWEL
models satisfy building code
requirements for emergency egress.
STANDARD SIZES AND MODEL NUMBERS
Side
Panel Window No. Optional
Height
Width Ext. of Inside Project Number Inside Project Dome
Panel Tiers Width from of Width from Cover
Foundation Modules Foundation
36" 4048-42 X 2 42" 41" 4042C CG1 stkwl-48 3 49-1/2" 40-1/4" stkwl-48D
48" 4048-54 X 2 54" 41" 4054C CG2 stkwl-48 3 49-1/2" 40-1/4" stkwl-48D
60" 4048-66 X 2 66" 41" 4066C CG3 X X X X X
36" 4862-42 X 3 42" 49" 4842C CG4 stkwl-48 4 49-1/2" 40-1/4" stkwl-48D
48" 4862-54 X 3 54" 49" 4854C CG5 stkwl-48 4 49-1/2" 40-1/4" stkwl-48D
60" 4862-66 X 3 66" 49" 4866C CG6 X X X X X
36" 4862-42 3019-42 3 42" 49" 4842C CG4 stkwl-48 5 49-1/2" 40-1/4" stkwl-48D
48" 4862-54 3019-54 3 54" 49" 4854C CG5 stkwl-48 5 49-1/2" 40-1/4" stkwl-48D
X- Not available
81"
Selecting the Proper Size Egress Window Well
ScapeWEL
®
Window Wells StakWEL
®
Window Wells
Model # Dimensions Optional Model # Dimensions
Dome Grate
+ 7-1/2"
Dimension A
Well
Cover
Well
48"
62"