Users Manual

Playing Music

Connecting with a 3.5 mm Aux Cable

Using the Active Noise Control

Plug one connector of a 3.5 mm auxiliary cable into the 3.5 mm

aux input port on the bottom of the left earcup.

Plug the other connector into the audio output port on your media-playing device.

In auxiliary mode,playback and volume will be adjusted with the controls on

your connected device.

The headphones will automatically power OFF when a 3.5 mm aux cable is

plugged.

The headphones’ Active Noise Control(noise cancelling)feature reduces unwanted

noise from the outside environment.You can use ANC while listening to audio,or

use ANC by itself.

Press the button to turn on Active Noise Control(noose cancellation).

The ANC LED indicator will Light up solid Green.

Press the button again to turn ANC off. The ANC LED indicator will turn OFF.

159mm

205mm

Approved

Ira geller 530/2019

2AHFC-BB2609

Active Noise Cancellation

Wireless Headphone

BB2609

PAGE 1
Approved Ira geller 530/2019 Active Noise Cancellation Wireless Headphone BB2609 205mm Playing Music 2AHFC-BB2609 K. Connecting with a 3.5 mm Aux Cable Plug one connector of a 3.5 mm auxiliary cable into the 3.5 mm aux input port on the bottom of the left earcup. Plug the other connector into the audio output port on your media-playing device. In auxiliary mode,playback and volume will be adjusted with the controls on your connected device. The headphones will automatically power OFF when a 3.