8” RECHARGEABLE PARTY SPEAKER Model # PSP-2 Instruction Manual Instrucciones en español incluidas
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING YOUR PAR TY SPEAKER. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. Your Speaker has an internal rechargeable battery. Improper usage may result in the Speaker becoming hot, ignite or burst and cause injury if exposed to conditions of abuse. Be sure to follow the safety warnings listed below: 1. Do not assemble, throw away or damage the Party Speaker. 2.
Powering up your speaker 1.Plug the micro USB plug into your speaker’s micro USB charging port 2. Plug the USB side of your cable into your computer or laptop’s USB charging port, or into a standard USB charger (not included) 3. Make certain that your computer or laptop is powered on, or the USB charger is plugged in to begin charging. 4. The Charging indicator LED light should illuminate RED when charging and then turn off when the battery is fully charged.
Connecting your TF Card 1.Insert your TF Card into the TF card interface. 2.The mode should switch automatically to “TF Mode” 4.Adjust the volume as needed. 5.Press the Next , Previous, Play/Pause buttons as needed. Recording onto your USB Device 1.Insert your USB Stick into the USB interface. 2.Long Press the RECORD button on your panel and start to record. 3.
LIMITED WARRANTY ESI Cases & Accessories, Inc., warrants to the first consumer purchaser that this product, when shipped in its original container to the original purchaser will be free from defective workmanship and materials for one year and agrees that it will, at its option, either repair the defect and replace the defective product or part thereof at no charge to the purchaser for parts or labor for the time periods described.
Return Instructions If your speaker malfunctions during the warranty period of one calendar year (90 days for battery), contact our customer service department at (212) 883-8838 to obtain troubleshooting information. If troubleshooting assistance fails to remedy the problem, you will receive a return authorization # and instructions for sending your unit to our Service Center. Your return authorization number must be clearly visible and placed on the outside of box when the unit is returned.
FCC ID:OGGK3MF82 FCC Information This device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation.Federal Communications Commission (FCC) StatementThis Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
