User Manual

Printing Instructions

When printing instructions from a PDF make sure to change the

Page Scaling option in the Print dialouge box to None.

See example below.

Page Scaling: None

If you do not change the Print Scaling to None, the templates

provided will not match the correct dimensions.

PAGE 1
Printing Instructions When printing instructions from a PDF make sure to change the Page Scaling option in the Print dialouge box to None. See example below. Page Scaling: None If you do not change the Print Scaling to None, the templates provided will not match the correct dimensions.
PAGE 2
Brake Pad Installation Instructions #199450 / #199455 3.307 Applications • ‘55-‘57 Chevy • ‘58-‘64 Bel Air, Biscayne, Impala • ‘63-‘ 67 Nova Tools Needed: • 3/32” drill bit • 5/16” drill bit • Spray Adhesive .993 • Center punch • 7/16” wrench 1.606 1.737 1. Remove rubber pedal pad 2. Cut out template and apply spray adhesive to the back, align template with pedal and attach. 3. Center punch the pedal in the center of the holes as marked on the template.